►Nboost | |
►Niostreams | |
CAdaptableBinaryFunction | Go to http://www.sgi.com/tech/stl/AdaptableBinaryFunction.html |
CAdaptableBinaryPredicate | Go to http://www.sgi.com/tech/stl/AdaptableBinaryPredicate.html |
CAdaptableGenerator | Go to http://www.sgi.com/tech/stl/AdaptableGenerator.html |
CAdaptablePredicate | Go to http://www.sgi.com/tech/stl/AdaptablePredicate.html |
CAdaptableUnaryFunction | Go to http://www.sgi.com/tech/stl/AdaptableUnaryFunction.html |
CAdjacencyGraphConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/graph/doc/AdjacencyGraph.html |
CAssignable | Go to http://www.sgi.com/tech/stl/Assignable.html |
CAssociativeContainer | Go to http://www.sgi.com/tech/stl/AssociativeContainer.html |
CBackInsertionSequence | Go to http://www.sgi.com/tech/stl/BackInsertionSequence.html |
CBidirectionalIterator | Go to http://www.sgi.com/tech/stl/BidirectionalIterator.html |
CBinaryFunction | Go to http://www.sgi.com/tech/stl/BinaryFunction.html |
CBinaryPredicate | Go to http://www.sgi.com/tech/stl/BinaryPredicate.html |
CCollection | Go to http://www.sgi.com/tech/stl/Collection.html |
CConst_BinaryPredicate | Go to http://www.boost.org/libs/concept_check/reference.htm |
CContainer | Go to http://www.sgi.com/tech/stl/Container.html |
CConvertible | Go to http://www.boost.org/libs/concept_check/reference.htm |
CCopyConstructible | Go to http://www.sgi.com/tech/stl/CopyConstructible.html |
CDefaultConstructible | Go to http://www.sgi.com/tech/stl/DefaultConstructible.html |
CDigitalSurface_graph_traversal_category | |
CEdgeListGraphConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/graph/doc/EdgeListGraph.html |
CEqualityComparable | Go to http://www.sgi.com/tech/stl/EqualityComparable.html |
CForwardContainer | Go to http://www.sgi.com/tech/stl/ForwardContainer.html |
CForwardIterator | Go to http://www.sgi.com/tech/stl/ForwardIterator.html |
CFrontInsertionSequence | Go to http://www.sgi.com/tech/stl/FrontInsertionSequence.html |
CGenerator | Go to http://www.sgi.com/tech/stl/Generator.html |
►Cgraph_traits< DGtal::DigitalSurface< TDigitalSurfaceContainer > > | |
Cadjacency_iterator | |
Cedge_iterator | |
Cout_edge_iterator | |
►Cgraph_traits< DGtal::Object< TDigitalTopology, TDigitalSet > > | |
Cadjacency_iterator | |
Cedge_iterator | |
Cout_edge_iterator | |
CGraphConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/graph/doc/Graph.html |
Chash< DGtal::BigInteger > | |
Chash< DGtal::KhalimskyCell< dim, TInteger > > | |
Chash< DGtal::SignedKhalimskyCell< dim, TInteger > > | |
CIncidenceGraphConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/graph/doc/IncidenceGraph.html |
CInputIterator | Go to http://www.sgi.com/tech/stl/InputIterator.html |
CInteger | Go to http://www.boost.org/libs/concept_check/reference.htm |
Cis_integral | Go to http://www.boost.org/doc/libs/1_52_0/libs/type_traits/doc/html/index.html |
Cis_unsigned | Go to http://www.boost.org/doc/libs/1_52_0/libs/type_traits/doc/html/index.html |
CLessThanComparable | Go to http://www.sgi.com/tech/stl/LessThanComparable.html |
CMultiPassInputIterator | Go to http://www.boost.org/doc/libs/1_52_0/libs/utility/MultiPassInputIterator.html |
CMultipleAssociativeContainer | Go to http://www.sgi.com/tech/stl/MultipleAssociativeContainer.html |
CMutable_BidirectionalIterator | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_Container | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_ForwardContainer | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_ForwardIterator | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_RandomAccessContainer | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_RandomAccessIterator | Go to http://www.boost.org/libs/concept_check/reference.htm |
CMutable_ReversibleContainer | Go to http://www.boost.org/libs/concept_check/reference.htm |
CObject_graph_traversal_category | |
COutputIterator | Go to http://www.sgi.com/tech/stl/OutputIterator.html |
CPairAssociativeContainer | Go to http://www.sgi.com/tech/stl/PairAssociativeContainer.html |
CRandomAccessContainer | Go to http://www.sgi.com/tech/stl/RandomAccessContainer.html |
CRandomAccessIterator | Go to http://www.sgi.com/tech/stl/RandomAccessIterator.html |
CReversibleContainer | Go to http://www.sgi.com/tech/stl/ReversibleContainer.html |
CSequence | Go to http://www.sgi.com/tech/stl/Sequence.html |
CSGIAssignable | Go to http://www.boost.org/libs/concept_check/reference.htm |
CSignedInteger | Go to http://www.sgi.com/tech/stl/SignedInteger.html |
CSimpleAssociativeContainer | Go to http://www.sgi.com/tech/stl/SimpleAssociativeContainer.html |
CSortedAssociativeContainer | Go to http://www.sgi.com/tech/stl/SortedAssociativeContainer.html |
CUnaryFunction | Go to http://www.sgi.com/tech/stl/UnaryFunction.html |
CUnaryPredicate | Go to http://www.sgi.com/tech/stl/Predicate.html |
CUniqueAssociativeContainer | Go to http://www.sgi.com/tech/stl/UniqueAssociativeContainer.html |
CUnsignedInteger | Go to http://www.boost.org/libs/concept_check/reference.htm |
CVertexListGraphConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/graph/doc/VertexListGraph.html |
►Nboost_concepts | |
CBidirectionalTraversalConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/BidirectionalTraversal.html |
CForwardTraversalConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/ForwardTraversal.html |
CIncrementableIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/IncrementableIterator.html |
CInteroperableIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/InteroperableIterator.html |
CLvalueIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/LvalueIteratorConcept.html |
CRandomAccessTraversalConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/RandomAccessTraversal.html |
CReadableIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/ReadableIterator.html |
CSinglePassIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/SinglePassIterator.html |
CSwappableIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/SwappableIterator.html |
CWritableIteratorConcept | Go to http://www.boost.org/doc/libs/1_52_0/libs/iterator/doc/WritableIterator.html |
►NDGtal | DGtal is the top-level namespace which contains all DGtal functions and types |
►Nconcepts | Aim: Gathers several functions useful for concept checks |
►NConceptUtils | |
CCheckFalse | |
CCheckTag | |
CCheckTrue | |
CCheckTrue< TagTrue > | |
CCheckTrueOrFalse | |
CCheckUnknown | |
CCheckUnknown< TagUnknown > | |
CSameType | |
CSameType< T, T > | |
CBoard3DTo2D | Aim: The concept CDrawableWithBoard3DTo2D specifies what are the classes that admit an export with Board3DTo2D |
CCAdditivePrimitiveComputer | Aim: Defines the concept describing an object that computes some primitive from input points given group by group, while keeping some internal state. At any moment, the object is supposed to store at least one valid primitive for the formerly given input points. A primitive is an informal word that describes some family of objects that share common characteristics. Often, the primitives are geometric, e.g. digital planes |
CCAdjacency | Aim: The concept CAdjacency defines an elementary adjacency relation between points of a digital space |
CCBackInsertable | Aim: Represents types for which a std::back_insert_iterator can be constructed with std::back_inserter. Back Insertion Sequence are refinements of CBackInsertable. They require more services than CBackInsertable, for instance read services or erase services |
CCBidirectionalRange | Aim: Defines the concept describing a bidirectional range |
CCBidirectionalRangeFromPoint | Aim: refined concept of single pass range with a begin() method from a point |
CCBidirectionalRangeWithWritableIterator | Aim: refined concept of bidirectional range which require that a reverse output iterator exists |
CCBidirectionalRangeWithWritableIteratorFromPoint | Aim: refined concept of single pass range with an routputIterator() method from a point |
CCBidirectionalSegmentComputer | Aim: Defines the concept describing a bidirectional segment computer, ie. a model of concepts::CSegment that can extend itself in the two possible directions |
CCBinner | Aim: Represents an object that places a quantity into a bin, i.e. a functor that associates a natural integer to a continuous value |
CCBoundedNumber | Aim: The concept CBoundedNumber specifies what are the bounded numbers. Models of this concept should be listed in NumberTraits class and should have the isBounded property |
CCCellEmbedder | Aim: A cell embedder is a mapping from unsigned cells to Euclidean points. It adds inner types to functor |
CCCellFunctor | Aim: Defines a functor on cells |
CCCellularGridSpaceND | Aim: This concept describes a cellular grid space in nD. In these spaces obtained by cartesian product, cells have a cubic shape that depends on the dimension: 0-cells are points, 1-cells are unit segments, 2-cells are squares, 3-cells are cubes, and so on |
CCColorMap | Aim: Defines the concept describing a color map. A color map converts a value within a given range into an RGB triple |
CCCommutativeRing | Aim: Defines the mathematical concept equivalent to a unitary commutative ring |
CCConstBidirectionalRange | Aim: Defines the concept describing a bidirectional const range |
CCConstBidirectionalRangeFromPoint | Aim: refined concept of const bidirectional range with a begin() method from a point |
CCConstImage | Aim: Defines the concept describing a read-only image, which is a refinement of CPointFunctor |
CCConstSinglePassRange | Aim: Defines the concept describing a const single pass range |
CCConstSinglePassRangeFromPoint | Aim: refined concept of const single pass range with a begin() method from a point |
CCCurveLocalGeometricEstimator | Aim: This concept describes an object that can process a range so as to return one estimated quantity for each element of the range (or a given subrange) |
CCDenseMatrix | Aim: Represent any dynamic or static sized matrix having dense representation |
CCDenseVector | Aim: Represent any dynamic or static sized matrix having dense representation |
CCDigitalBoundedShape | Aim: designs the concept of bounded shapes in DGtal (shape for which upper and lower bounding bounds are available) |
CCDigitalMetricSpace | Aim: defines the concept of digital metric spaces |
CCDigitalOrientedShape | Aim: characterizes models of digital oriented shapes. For example, models should provide an orientation method for points on a SpaceND. Returned value type corresponds to DGtal::Orientation |
CCDigitalSet | Aim: Represents a set of points within the given domain. This set of points is modifiable by the user. It is thus very close to the STL concept of simple associative container (like set std::set<Point>), except that there is a notion of maximal set of points (the whole domain) |
CCDigitalSetArchetype | Aim: The archetype of a container class for storing sets of digital points within some given domain |
CCDigitalSurfaceContainer | Aim: The digital surface container concept describes a minimal set of inner types and methods so as to describe the data of digital surfaces |
CCDigitalSurfaceEmbedder | Aim: A digital surface embedder is a specialized mapping from signed cells to Euclidean points. It adds inner types to functor as well as a method to access the digital surface |
CCDigitalSurfaceLocalEstimator | Aim: This concept describes an object that can process a range over some generic digital surface so as to return one estimated quantity for each element of the range (or a given subrange) |
CCDigitalSurfaceTracker | Aim: |
CCDiscreteExteriorCalculusVectorSpace | Aim: Lift linear algebra container concept into the dec package |
CCDomain | Aim: This concept represents a digital domain, i.e. a non mutable subset of points of the given digital space |
CCDomainAdjacency | Aim: Refines the concept CAdjacency by telling that the adjacency is specific to a given domain of the embedding digital space |
CCDomainArchetype | Aim: The archetype of a class that represents a digital domain, i.e. a non mutable subset of points of the given digital space |
CCDrawableWithBoard2D | Aim: The concept CDrawableWithBoard2D specifies what are the classes that admit an export with Board2D |
CCDrawableWithBoard3DTo2D | |
CCDrawableWithDisplay3D | |
CCDrawableWithViewer3D | Aim: The concept CDrawableWithViewer3D specifies what are the classes that admit an export with Viewer3D |
CCDynamicBidirectionalSegmentComputer | Aim: Defines the concept describing a dynamic and bidirectional segment computer, ie. a model of concepts::CSegment that can extend and retract itself in either direction |
CCDynamicMatrix | Aim: Represent any dynamic sized matrix having sparse or dense representation |
CCDynamicSegmentComputer | Aim: Defines the concept describing a dynamic segment computer, ie. a model of CSegment that can extend and retract itself (in the direction that is relative to the underlying iterator) |
CCDynamicVector | Aim: Represent any dynamic sized column vector having sparse or dense representation |
CCEuclideanBoundedShape | |
CCEuclideanOrientedShape | Aim: characterizes models of digital oriented shapes. For example, models should provide an orientation method for real points. Returned value type corresponds to DGtal::Orientation |
CCEuclideanRing | Aim: Defines the mathematical concept equivalent to a unitary commutative ring with a division operator |
CCForwardSegmentComputer | Aim: Defines the concept describing a forward segment computer. Like any model of CIncrementalSegmentComputer, it can control its own extension (in the direction that is relative to the underlying iterator) so that an implicit predicate P remains true. However, contrary to models of CIncrementalSegmentComputer, it garantees that P is also true for any subrange of the whole segment at any time. This extra constraint is necessary to be able to incrementally check whether or not the segment is maximal |
CCGlobalGeometricEstimator | Aim: This concept describes an object that can process a range so as to return one estimated quantity for the whole range |
CCGraphVisitor | Aim: Defines the concept of a visitor onto a graph, that is an object that traverses vertices of the graph according to some order. The user can either use the visitor as is, or even constrain the traversal with a given predicate |
CCImage | Aim: Defines the concept describing a read/write image, having an output iterator |
CCImageCacheReadPolicy | Aim: Defines the concept describing a cache read policy |
CCImageCacheWritePolicy | Aim: Defines the concept describing a cache write policy |
CCImageFactory | Aim: Defines the concept describing an image factory |
CCImplicitFunction | Aim: Describes any function of the form f(x), where x is some real point in the given space, and f(x) is some value |
CCImplicitFunctionDiff1 | Aim: Describes a 1-differentiable function of the form f(x), where x is some real point in the given space, and f(x) is some value |
CCIncrementalPrimitiveComputer | Aim: Defines the concept describing an object that computes some primitive from input points given one at a time, while keeping some internal state. At any moment, the object is supposed to store at least one valid primitive for the formerly given input points. A primitive is an informal word that describes some family of objects that share common characteristics. Often, the primitives are geometric, e.g. digital planes |
CCIncrementalSegmentComputer | Aim: Defines the concept describing an incremental segment computer, ie. a model of CSegmentFactory that can, in addition, incrementally check whether or not an implicit predicate P is true. In other words, it can control its own extension from a range of one element (in the direction that is relative to the underlying iterator) so that an implicit predicate P remains true |
CCInteger | Aim: Concept checking for Integer Numbers. More precisely, this concept is a refinement of both CEuclideanRing and CIntegralNumber |
CCIntegralNumber | Aim: Concept checking for Integral Numbers. Models of this concept should be listed in NumberTraits class and should have the isIntegral property |
CCLabel | Aim: Define the concept of DGtal labels. Models of CLabel can be default-constructible, assignable and equality comparable |
CCLinearAlgebra | Aim: Check right multiplication between matrix and vector and internal matrix multiplication. Matrix and vector scalar types should be the same |
CCLinearAlgebraSolver | Aim: Describe a linear solver defined over a linear algebra. Problems are of the form: |
CCLMSTTangentFromDSS | Aim: Defines the concept describing a functor which calculates a direction of the 2D DSS and an eccentricity [45] of a given point in this DSS |
CCLocalEstimatorFromSurfelFunctor | Aim: this concept describes functors on digtal surface surfel which can be used to define local estimator using the adapter LocalEstimatorFromSurfelFunctorAdapter |
CCMatrix | Aim: Represent any static or dynamic sized matrix having sparse or dense representation |
CCMetricSpace | Aim: defines the concept of metric spaces |
CCNormalVectorEstimator | Aim: Represents the concept of estimator of normal vector along digital surfaces |
CCOrientationFunctor | Aim: This concept gathers models implementing an orientation test of \( k+1 \) points in a space of dimension \( n \) |
CCOrientationFunctor2 | Aim: This concept is a refinement of COrientationFunctor, useful for simple algebraic curves that can be uniquely defined by only two points |
CCPointEmbedder | Aim: A point embedder is a mapping from digital points to Euclidean points. It adds inner types to functor |
CCPointFunctor | Aim: Defines a functor on points |
CCPointPredicate | Aim: Defines a predicate on a point |
CCPolarPointComparator2D | Aim: This concept gathers classes that are able to compare the position of two given points \( P, Q \) around a pole \( O \). More precisely, they compare the oriented angles lying between the horizontal line passing by \( O \) and the rays \( [OP) \) and \( [OQ) \) (in a counter-clockwise orientation). This is equivalent to compare the angle in radians from 0 (included) to 2 π (excluded) |
CCPositiveIrreducibleFraction | Aim: Defines positive irreducible fractions, i.e. fraction p/q, p and q non-negative integers, with gcd(p,q)=1 |
CCPowerMetric | Aim: defines the concept of special weighted metrics, so called power metrics |
CCPowerSeparableMetric | Aim: defines the concept of separable metrics |
CCPreCellularGridSpaceND | Aim: This concept describes an unbounded cellular grid space in nD. In these spaces obtained by cartesian product, cells have a cubic shape that depends on the dimension: 0-cells are points, 1-cells are unit segments, 2-cells are squares, 3-cells are cubes, and so on |
CCPredicate | Aim: Defines a predicate function, ie. a functor mapping a domain into the set of booleans |
CCPrimitiveComputer | Aim: Defines the concept describing an object that computes some primitive from input points, while keeping some internal state. At any moment, the object is supposed to store at least one valid primitive for the formerly given input points. A primitive is an informal word that describes some family of objects that share common characteristics. Often, the primitives are geometric, e.g. digital planes |
CCQuantity | Aim: defines the concept of quantity in DGtal |
CCSCellEmbedder | Aim: A cell embedder is a mapping from signed cells to Euclidean points. It adds inner types to functor |
CCSegment | Aim: Defines the concept describing a segment, ie. a valid and not empty range |
CCSegmentComputerEstimator | Aim: This concept is a refinement of CCurveLocalGeometricEstimator devoted to the estimation of a geometric quantiy along a segment detected by a segment computer |
CCSegmentFactory | Aim: Defines the concept describing a segment ie. a valid and not empty subrange, which can construct instances of its own type or of derived type |
CCSeparableMetric | Aim: defines the concept of separable metrics |
CCSignedNumber | Aim: Concept checking for Signed Numbers. Models of this concept should be listed in NumberTraits class and should have the isSigned property |
CCSinglePassRange | Aim: Defines the concept describing a range |
CCSinglePassRangeFromPoint | Aim: refined concept of single pass range with a begin() method from a point |
CCSinglePassRangeWithWritableIterator | Aim: refined concept of const single pass range which require that an output iterator exists |
CCSinglePassRangeWithWritableIteratorFromPoint | Aim: refined concept of single pass range with a outputIterator() method from a point |
CCSpace | Aim: Defines the concept describing a digital space, ie a cartesian product of integer lines |
CCSparseMatrix | Aim: Represent any dynamic or static sized matrix having sparse representation |
CCStack | Aim: This concept gathers classes that provide a stack interface |
CCStaticMatrix | Aim: Represent any static sized matrix having sparse or dense representation |
CCStaticVector | Aim: Represent any static sized column vector having sparse or dense representation |
CCSTLAssociativeContainer | Aim: Defines the concept describing an Associative Container of the STL (https://www.sgi.com/tech/stl/AssociativeContainer.html) |
CCSurfelLocalEstimator | Aim: This concept describes an object that can process a range of surfels (that are supposed to belong to some (abstract) surface) so as to return one estimated quantity for each element of the range (or a given subrange) |
CCSurfelPredicate | Aim: Defines a predicate on a surfel |
CCTrivialConstImage | Aim: Defines the concept describing a read-only image, which is a refinement of CPointFunctor |
CCTrivialImage | Aim: Defines the concept describing an image without extra ranges, which is a refinement of CTrivialConstImage |
CCUnaryFunctor | Aim: Defines a unary functor, which associates arguments to results |
CCUnaryFunctor< X, A &, R & > | |
CCUndirectedSimpleGraph | Aim: Represents the concept of local graph: each vertex has neighboring vertices, but we do not necessarily know all the vertices |
►CCUndirectedSimpleLocalGraph | Aim: Represents the concept of local graph: each vertex has neighboring vertices, but we do not necessarily know all the vertices |
CVertexMap | |
CCUnsignedNumber | Aim: Concept checking for Unsigned numbers. Models of this concept should be listed in NumberTraits class and should have the isUnsigned property |
CCVector | Aim: Represent any static or dynamic sized column vector having sparse or dense representation |
CCVectorSpace | Aim: Base concept for vector space structure |
CCVertexMap | Aim: models of CVertexMap concept implement mapping between graph vertices and values |
CCVertexPredicate | Aim: Defines a predicate on a vertex |
CCVertexPredicateArchetype | Aim: Defines a an archetype for concept CVertexPredicate |
CCWithGradientMap | Aim: Such object provides a gradient map that associates to each argument some real vector |
CDisplay3D | Aim: The concept CDrawableWithDisplay3D specifies what are the classes that admit an export with Display3D |
►Ndeprecated | Deprecated functions and types of the DGtal library |
►Nconcepts | |
CCConvolutionWeights | Aim: defines models of centered convolution kernel used for normal vector integration for instance |
CConstantConvolutionWeights | Aim: implement a trivial constant convolution kernel which returns 1 to each distance |
CDigitalShapesIntersection | Aim: Intersection between two models of CDigitalBoundedShape and CDigitalOrientedShape |
CDigitalShapesMinus | Aim: Minus between two models of CDigitalBoundedShape and CDigitalOrientedShape |
CDigitalShapesUnion | Aim: Union between two models of CDigitalBoundedShape and CDigitalOrientedShape |
CDomainMetricAdjacency | Aim: Describes digital adjacencies in a digital domain that are defined with the 1-norm and the infinity-norm |
CEuclideanShapesIntersection | Aim: Intersection between two models of CEuclideanBoundedShape and CEuclideanOrientedShape |
CEuclideanShapesMinus | Aim: Minus between two models of CEuclideanBoundedShape and CEuclideanOrientedShape |
CEuclideanShapesUnion | Aim: Union between two models of CEuclideanBoundedShape and CEuclideanOrientedShape |
CGaussianConvolutionWeights | Aim: implement a Gaussian centered convolution kernel |
►CIntegralInvariantNormalVectorEstimator | Aim: This class implement an Integral Invariant normal vector estimator |
CCovarianceMatrix2NormalDirectionFunctor | |
CLocalConvolutionNormalVectorEstimator | Aim: Computes the normal vector at a surface element by convolution of elementary normal vector to adjacent surfel |
CSetPredicate | Aim: The predicate returning true iff the point is in the set given at construction. The set given at construction is aliased in the predicate and not cloned, which means that the lifetime of the set should exceed the lifetime of the predicate |
►Ndetail | detail namespace gathers internal classes and functions |
CComparatorAdapter | |
CComparatorAdapter< Container, true, false, false > | Unordered set-like adapter |
CComparatorAdapter< Container, true, false, true > | Unordered map-like adapter |
CComparatorAdapter< Container, true, true, false > | Set-like adapter |
CComparatorAdapter< Container, true, true, true > | Map-like adapter |
CCurvatureFromDCA | |
CCurvatureFromDCA< false > | |
CCurvatureFromDSSBaseEstimator | |
CCurvatureFromDSSLength | |
CCurvatureFromDSSLengthAndWidth | |
CDistanceFromDCA | |
CDSSDecorator | Aim: Abstract DSSDecorator for ArithmeticalDSSComputer. Has 2 virtual methods returning the first and last leaning point: |
CDSSDecorator4ConcavePart | Aim: adapter for TDSS used by FP in CONCAVE parts. Has 2 methods: |
CDSSDecorator4ConvexPart | Aim: adapter for TDSS used by FP in CONVEX parts. Has 2 methods: |
CEqualPredicateFromLessThanComparator | |
CEuclideanDivisionHelper | Aim: Small stucture that provides a static method returning the Euclidean division of two integers |
CEuclideanDivisionHelper< double > | |
CEuclideanDivisionHelper< float > | |
CEuclideanDivisionHelper< long double > | |
CFFTWComplexCast | Facility to cast to the complex type used by fftw |
CFFTWWrapper | Wrapper to fftw functions depending on value type |
CFFTWWrapper< double > | |
CFFTWWrapper< float > | |
CFFTWWrapper< long double > | |
CHasNestedTypeCategory | Aim: Checks whether type T has a nested type called 'Category' or not. NB: from en.wikipedia.org/wiki/Substitution_failure_is_not_an_error NB: to avoid various compiler issues, we use BOOST_STATIC_CONSTANT according to http://www.boost.org/development/int_const_guidelines.html |
CHasNestedTypeType | Aim: Checks whether type IC has a nested type called 'Type' or not. NB: from en.wikipedia.org/wiki/Substitution_failure_is_not_an_error NB: to avoid various compiler issues, we use BOOST_STATIC_CONSTANT according to http://www.boost.org/development/int_const_guidelines.html |
CIsAssociativeContainerFromCategory | |
CIsCirculator | Aim: Checks whether type IC is a circular or a classical iterator. Static value set to 'true' for a circulator, 'false' otherwise. 1) if type IC has no nested type 'Type', it is a classical iterator and 'false' is returned. 2) if type IC has a nested type 'Type', 'true' is returned is 'Type' is CirculatorType, 'false' otherwise |
CIsCirculator< IC, true > | |
CIsCirculatorFromType | Aim: In order to check whether type IC is a circular or a classical iterator, the nested type called 'Type' is read |
CIsCirculatorFromType< IC, CirculatorType > | |
CIsContainerFromCategory | |
CIsMultipleAssociativeContainerFromCategory | |
CIsOrderedAssociativeContainerFromCategory | |
CIsPairAssociativeContainerFromCategory | |
CIsSequenceContainerFromCategory | |
CIsSimpleAssociativeContainerFromCategory | |
CIsUniqueAssociativeContainerFromCategory | |
CIsUnorderedAssociativeContainerFromCategory | |
CIteratorCirculatorTypeImpl | Aim: Defines the Iterator or Circulator type as a nested type according to the value of b |
CIteratorCirculatorTypeImpl< true > | |
CKeyComparatorForPairKeyData | |
CLabelledMapMemFunctor | |
Cmonomial_node | |
CNormalizedTangentVectorFromDSS | |
CNormalVectorFromDCA | |
CPointValueCompare | Aim: Small binary predicate to order candidates points according to their (absolute) distance value |
CPosDepScaleDepSCEstimator | |
CPosDepScaleIndepSCEstimator | |
CPosIndepScaleDepSCEstimator | |
CPosIndepScaleIndepSCEstimator | |
Cpower_node | |
CSetFunctionsImpl | Aim: Specialize set operations (union, intersection, difference, symmetric_difference) according to the given type of container. It uses standard algorithms when containers are ordered, otherwise it provides a default implementation |
CSetFunctionsImpl< Container, false, true > | |
CSetFunctionsImpl< Container, true, false > | |
CSetFunctionsImpl< Container, true, true > | |
CTangentAngleFromDSS | |
CTangentVectorFromDCA | |
CTangentVectorFromDSS | |
CtoCoordinateImpl | Aim: Define a simple functor that can cast a signed integer (possibly a DGtal::BigInteger) into another |
Ctop_node | |
►Nexperimental | Experimental functions and types of the DGtal library |
►CChamferNorm2D | Aim: implements a model of CSeparableMetric for Chamfer and path based norms |
CLessOrEqThanAngular | |
CLessThanAngular | |
►CImageContainerByHashTree | Model of CImageContainer implementing the association key<->Value using a hash tree. This class provides a built-in iterator |
CIterator | Built-in iterator on an HashTree. This iterator visits all node in the tree |
CNode | |
►Nfunctions | functions namespace gathers all DGtal functionsxs |
►Nfunctors | functors namespace gathers all DGtal functors |
►Ndeprecated | |
CSCellToMidPoint | Aim: transforms a scell into a real point (the coordinates are divided by 2) |
►NShapeGeometricFunctors | |
CShapeMeanCurvatureFunctor | Aim: A functor RealPoint -> Quantity that returns the mean curvature at given point |
CShapeNormalVectorFunctor | Aim: A functor RealPoint -> Quantity that returns the normal vector at given point |
CShapePositionFunctor | Aim: A functor RealPoint -> Quantity that returns the position of the point itself |
CAbs | |
CAndBoolFct2 | |
CBackwardRigidTransformation2D | Aim: implements backward rigid transformation of point in the 2D integer space. Warring: This version uses closest neighbor interpolation |
CBackwardRigidTransformation3D | Aim: implements backward rigid transformation of point in 3D integer space around any arbitrary axis. This implementation uses the Rodrigues' rotation formula. Warring: This version uses closest neighbor interpolation |
CBallConstantFunction | |
CBallConstantPointFunction | |
CBasicDomainSubSampler | Aim: Functor that subsamples an initial domain by given a grid size and a shift vector. By this way, for a given point considered in a new domain, it allows to recover the point coordinates in the source domain. Such functor can be usefull to apply basic image subsampling in any dimensions by using ImageAdapter class |
CBinaryPointPredicate | Aim: The predicate returns true when the given binary functor returns true for the two PointPredicates given at construction |
CBinaryPointPredicate< TPointPredicate1, TPointPredicate2, AndBoolFct2 > | |
CBinaryPointPredicate< TPointPredicate1, TPointPredicate2, OrBoolFct2 > | |
CBlueChannel | |
CBoundaryPredicate | Aim: The predicate on surfels that represents the frontier between a region and its complementary in an image. It can be used with ExplicitDigitalSurface or LightExplicitDigitalSurface so as to define a digital surface. Such surfaces may of course be open |
CCast | Aim: Define a simple functor using the static cast operator |
CColorRGBEncoder | |
CComposer | Aim: Define a new Functor from the composition of two other functors |
CConstantPointPredicate | Aim: The predicate that returns always the same value boolCst |
CConstValue | Aim: Define a simple functor that returns a constant value (0 by default) |
CConstValueCell | Aim: Define a simple functor that returns a constant quantity (0 by default) |
CDomainPredicate | Aim: The predicate returning true iff the point is in the domain given at construction. It is just a wrapper class around the methods Domain::isInside( const Point & ), where Domain stands for any model of CDomain |
CDomainRigidTransformation2D | Aim: implements bounds of transformed domain |
CDomainRigidTransformation3D | Aim: implements bounds of transformed domain |
CDummyEstimatorFromSurfels | |
CElementaryConvolutionNormalVectorEstimator | Aim: Estimates normal vector by convolution of elementary normal vector to adjacent surfel |
CEqualPointPredicate | Aim: The predicate returns true when the point given as argument equals the reference point given at construction |
CFalseBoolFct0 | |
CFalsePointPredicate | Aim: The predicate that returns always false |
CFlipDomainAxis | Aim: Functor that flips the domain coordinate system from some selected axis. For instance, if a flip on the y axis is applied on a domain of bounds (0, 0, 0) (MaxX, MaxY, MaxZ), then the coordinate of P(x,y,z) will transformed in P(x, MaxY-y, z) |
CForwardRigidTransformation2D | Aim: implements forward rigid transformation of point in the 2D integer space. Warring: This version uses closest neighbor interpolation |
CForwardRigidTransformation3D | Aim: implements forward rigid transformation of point in 3D integer space around any arbitrary axis. This implementation uses the Rodrigues' rotation formula. Warring: This version uses closest neighbor interpolation |
CFrontierPredicate | Aim: The predicate on surfels that represents the frontier between two regions in an image. It can be used with ExplicitDigitalSurface or LightExplicitDigitalSurface so as to define a digital surface. Such surfaces may of course be open |
CGaussianKernel | Aim: defines a functor on double numbers which corresponds to a Gaussian convolution kernel. This functor acts from [0,1] to [0,1] |
CGreenChannel | |
CHatFunction | |
CHatPointFunction | |
CIdentity | Aim: Define a simple default functor that just returns its argument |
CIdentityBoolFct1 | |
CIICurvatureFunctor | Aim: A functor Real -> Real that returns the 2d curvature by transforming the given volume. This functor is valid only in 2D space |
CIIFirstPrincipalCurvature3DFunctor | Aim: A functor Matrix -> Real that returns the first principal curvature value by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that by first we mean the value with first greatest curvature in absolute value |
CIIFirstPrincipalDirectionFunctor | Aim: A functor Matrix -> RealVector that returns the first principal curvature direction by diagonalizing the given covariance matrix. This functor is valid starting from 2D space and is equivalent to IITangentDirectionFunctor in 2D. Note that by first we mean the direction with greatest curvature in absolute value |
CIIGaussianCurvature3DFunctor | Aim: A functor Matrix -> Real that returns the Gaussian curvature by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that the Gaussian curvature is computed by multiplying the two gretest curvature values in absolute value |
CIIMeanCurvature3DFunctor | Aim: A functor Real -> Real that returns the 3d mean curvature by transforming the given volume. This functor is valid only in 3D space |
CIINormalDirectionFunctor | Aim: A functor Matrix -> RealVector that returns the normal direction by diagonalizing the given covariance matrix |
CIIPrincipalCurvatures3DFunctor | Aim: A functor Matrix -> std::pair<Real,Real> that returns the first and the second principal curvature value by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that by first we mean the value with first greatest curvature in absolute value |
CIIPrincipalDirectionsFunctor | Aim: A functor Matrix -> std::pair<RealVector,RealVector> that returns the first and the second principal curvature directions by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that by second we mean the direction with second greatest curvature in absolute value |
CIISecondPrincipalCurvature3DFunctor | Aim: A functor Matrix -> Real that returns the second principal curvature value by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that by second we mean the value with second greatest curvature in absolute value |
CIISecondPrincipalDirectionFunctor | Aim: A functor Matrix -> RealVector that returns the second principal curvature direction by diagonalizing the given covariance matrix. This functor is valid starting from 3D space. Note that by second we mean the direction with second greatest curvature in absolute value |
CIITangentDirectionFunctor | Aim: A functor Matrix -> RealVector that returns the tangent direction by diagonalizing the given covariance matrix. This functor is valid only in 2D space |
CImpliesBoolFct2 | |
CIntervalForegroundPredicate | Aim: Define a simple Foreground predicate thresholding image values between two constant values (the first one being excluded) |
CIntervalThresholder | Aim: A small functor with an operator () that compares one value to an interval |
CIsLowerPointPredicate | Aim: The predicate returns true when the point is below (or equal) the given upper bound |
CIsUpperPointPredicate | Aim: The predicate returns true when the point is above (or equal) the given lower bound |
CIsWithinPointPredicate | Aim: The predicate returns true when the point is within the given bounds |
CLambda64Function | |
CLambdaExponentialFunction | |
CLambdaSinFromPiFunction | |
CLargeTruncationFunctor | Binary functor that returns the algebraic quotient i of a/b with any fractional part discarded (truncation toward zero). Note that \( |i| \leq |a/b| \) |
CLinearLeastSquareFittingNormalVectorEstimator | Aim: Estimates normal vector using CGAL linear least squares plane fitting |
CMax | |
CMeanChannels | |
CMin | Duplicated STL functors |
CMinus | |
CMongeJetFittingGaussianCurvatureEstimator | Aim: Estimates Gaussian curvature using CGAL Jet Fitting and Monge Form |
CMongeJetFittingMeanCurvatureEstimator | Aim: Estimates Mean curvature using CGAL Jet Fitting and Monge Form |
CMongeJetFittingNormalVectorEstimator | Aim: Estimates normal vector using CGAL Jet Fitting and Monge Form |
CMongeJetFittingPrincipalCurvaturesEstimator | Aim: Estimates Gaussian curvature using CGAL Jet Fitting and Monge Form |
CMultiplicationByScalar | |
CNotBoolFct1 | |
CNotPointPredicate | Aim: The predicate returns true when the point predicate given at construction return false. Thus inverse a predicate: NOT operator |
COrBoolFct2 | |
CPair1st | Aim: Define a simple functor that returns the first member of a pair |
CPair1stMutator | Aim: Define a simple unary functor that returns a reference on the first member of a pair in order to update it |
CPair2nd | Aim: Define a simple functor that returns the second member of a pair |
CPair2ndMutator | Aim: Define a simple unary functor that returns a reference on the first member of a pair in order to update it |
CPoint2DEmbedderIn3D | Aim: Functor that embeds a 2D point into a 3D space from two axis vectors and an origin point given in the 3D space |
CPoint2ShapePredicate | Aim: Predicate returning 'true' iff a given point is in the 'interior' of a given shape, 'false' otherwise |
CPoint2ShapePredicateComparator | Aim: A small struct with an operator that compares two values according to two bool template parameters |
CPoint2ShapePredicateComparator< T, false, false > | Aim: A small struct with an operator that compares two values (<) |
CPoint2ShapePredicateComparator< T, false, true > | Aim: A small struct with an operator that compares two values (<=) |
CPoint2ShapePredicateComparator< T, true, false > | Aim: A small struct with an operator that compares two values (>) |
CPoint2ShapePredicateComparator< T, true, true > | Aim: A small struct with an operator that compares two values (>=) |
CPointFunctorFromPointPredicateAndDomain | Create a point functor from a point predicate and a domain |
CPointFunctorPredicate | Aim: The predicate returns true when the predicate returns true for the value assigned to a given point in the point functor |
CPolarPointComparatorBy2x2DetComputer | Aim: Class that implements a binary point predicate, which is able to compare the position of two given points \( P, Q \) around a pole \( O \). More precisely, it compares the oriented angles lying between the horizontal line passing by \( O \) and the rays \( [OP) \) and \( [OQ) \) (in a counter-clockwise orientation) |
CPositionFunctorFrom2DPoint | Functor that returns the position of any point/vector with respect to a digital straight line of shift myShift. We recall that the shift vector is a vector translating a point of remainder \( r \) to a point of remainder \( r + \omega \). See Digital straight lines and segments for further details |
CPredicateCombiner | Aim: The predicate returns true when the given binary functor returns true for the two Predicates given at construction |
CProjector | Aim: Functor that maps a point P of dimension i to a point Q of dimension j. The member myDims is an array containing the coordinates - (0, 1, ..., j-1) by default - that are copied from P to Q |
CRedChannel | |
CRescaling | Aim: Functor allowing to rescale a value. Values of the initial scale [initMin,initMax] are rescaled to the new scale [newMin,newMax] |
CSCellToArrow | Aim: transforms a signed cell into an arrow, ie. a pair point-vector |
CSCellToCode | Aim: transforms a 2d signed cell, basically a linel, into a code (0,1,2 or 3), |
CSCellToIncidentPoints | Aim: transforms a signed cell c into a pair of points corresponding to the signed cells of greater dimension that are indirectly and directly incident to c |
CSCellToInnerPoint | Aim: transforms a signed cell c into a point corresponding to the signed cell of greater dimension that is indirectly incident to c |
CSCellToOuterPoint | Aim: transforms a signed cell c into a point corresponding to the signed cell of greater dimension that is directly incident to c |
CSCellToPoint | Aim: transforms a scell into a point |
CSimpleThresholdForegroundPredicate | Aim: Define a simple Foreground predicate thresholding image values given a single thresold. More precisely, the functor operator() returns true if the value is greater than a given threshold |
CSliceRotator2D | Special Point Functor that adds one dimension to a 2D point and apply on it a rotation of angle alpha according to a given direction and the domain center. It also checks if the resulting point is inside the 3D domain, else it returns a particular point (by default the point at domain origin (from the domain method lowerBound()) |
►CSphereFittingEstimator | Aim: Use Patate library to perform a local sphere fitting |
CPatatePoint | |
CQuantity | Quantity type: a 3-sphere (model of CQuantity) |
CSphericalHoughNormalVectorEstimator | Aim: This functor estimates normal vector for a collection of surfels using spherical accumulator based Hough voting |
CStrictTruncationFunctor | BinaryFunctor that computes the algebraic quotient i of a/b with any non zero fractional part discarded (truncation toward zero), and that returns i+1 (resp. i-1) if a is negative (resp. positive) if b divides a. Since we assume that a is not equal to 0, we have \( |i| < |a/b| \). See also LargeTruncationFunctor |
CSurfelSetPredicate | Aim: The predicate returning true iff the point is in the domain given at construction |
CTensorVotingFeatureExtraction | Aim: Implements a functor to detect feature points from normal tensor voting strategy |
CThresholder | Aim: A small functor with an operator () that compares one value to a threshold value according to two bool template parameters |
CThresholder< T, false, false > | |
CThresholder< T, false, true > | |
CThresholder< T, true, false > | |
CThresholder< T, true, true > | |
CTrueBoolFct0 | |
CTruePointPredicate | Aim: The predicate that returns always true |
CUnaryMinus | |
CVCMAbsoluteCurvatureFunctor | Aim: A functor Surfel -> Quantity that returns the absolute curvature at given surfel. This class has meaning only in 2D |
CVCMFirstPrincipalAbsoluteCurvatureFunctor | Aim: A functor Surfel -> Quantity that returns the first principal absolute curvature (greatest curvature) at given surfel. This class has meaning only in 3D |
CVCMMeanAbsoluteCurvatures3DFunctor | Aim: A functor Surfel -> Quantity that returns the mean of absolute curvatures at given surfel: (abs(k1)+abs(k2))/2. This class has meaning only in 3D |
CVCMNormalVectorFunctor | Aim: A functor Surfel -> Quantity that returns the outer normal vector at given surfel |
CVCMSecondPrincipalAbsoluteCurvatureFunctor | Aim: A functor Surfel -> Quantity that returns the second principal absolute curvature (smallest curvature) at given surfel. This class has meaning only in 3D |
CXorBoolFct2 | |
CAccFlower2D | Aim: Model of the concept StarShaped represents any accelerated flower in the plane |
CAddTextureImage2DWithFunctor | Class to insert a custom 2D textured image by using a conversion functor and allows to change the default mode (GrayScale mode) to color mode |
CAddTextureImage3DWithFunctor | Class to insert a custom 3D textured image by using a conversion functor and allows to change the default mode (GrayScale mode) to color mode |
CAlias | Aim: This class encapsulates its parameter class so that to indicate to the user that the object/pointer will be only aliased. Therefore the user is reminded that the argument parameter is given to the function without any additional cost and may be modified, while he is aware that the lifetime of the argument parameter must be at least as long as the object itself. Note that an instance of Alias<T> is itself a light object (it holds only an enum and a pointer) |
►CAlphaThickSegmentComputer | Aim: This class is devoted to the recognition of alpha thick segments as described in [34] . From a maximal diagonal alphaMax thickness, it recognizes thick segments and may thus take into account some noise in the input contour. Moreover points of the segment may not be (digitally) connected and may have floating point coordinates. Connection is only given by the order of the points |
CState | |
CAngleComputer | |
►CAngleLinearMinimizer | Aim: Used to minimize the angle variation between different angles while taking into accounts min and max constraints. Example ( |
CValueInfo | |
CAngleLinearMinimizerByAdaptiveStepGradientDescent | |
CAngleLinearMinimizerByGradientDescent | |
CAngleLinearMinimizerByRelaxation | |
CArithDSSIterator | Aim: An iterator on the points of a Digital Straight Segment. Template parameters are the integer type and the connectivity of the DSS (8-connectivity as default value) |
►CArithmeticalDSL | Aim: This class represents a naive (resp. standard) digital straight line (DSL), ie. the set of digital points \( (x,y) \in \mathbb{Z}^2 \) such that \( \mu \leq ax - by < \mu + \omega \) with \( a,b,\mu,\omega \in \mathbb{Z} \), \( \gcd(a,b) = 1 \) and \( \omega = \max(|a|,|b|) \) (resp. \( \omega = |a| + |b| \)). Note that any DSL such that \( \omega = \max(|a|,|b|) \) (resp. \( \omega = |a| + |b| \)) is simply 8-connected (resp. 4-connected) |
CConstIterator | Aim: This class aims at representing an iterator that provides a way to scan the points of a DSL. It is both a model of readable iterator and of bidirectional iterator |
CArithmeticalDSLKernel | Aim: Small class that contains the code that depends on the arithmetical thickness (either naive or standard) of a digital straight line (DSL). It provides mainly two static methods: |
CArithmeticalDSLKernel< TCoordinate, 4 > | |
CArithmeticalDSS | Aim: This class represents a naive (resp. standard) digital straight segment (DSS), ie. the sequence of simply 8- (resp. 4-)connected digital points contained in a naive (resp. standard) digital straight line (DSL) between two points of it |
CArithmeticalDSSComputer | Aim: This class is a wrapper around ArithmeticalDSS that is devoted to the dynamic recognition of digital straight segments (DSS) along any sequence of digital points |
CArithmeticalDSSFactory | Aim: Set of static methods that create digital straight segments (DSS) from some input parameters, eg. patterns (or reversed patterns) from two upper leaning points (or lower leaning points) |
CArrayImageAdapter< TArrayIterator, HyperRectDomain< TSpace > > | Aim: Image adapter for generic arrays with sub-domain view capability |
CArrayImageIterator | Aim: Random access iterator over an image given his definition domain and viewable domain |
CAssociativeCategory | |
CAvnaimEtAl2x2DetSignComputer | Aim: Class that provides a way of computing the sign of the determinant of a 2x2 matrix from its four coefficients, ie |
CBackInsertionSequenceToStackAdapter | Aim: This class implements a dynamic adapter to an instance of a model of back insertion sequence in order to get a stack interface. This class is a model of CStack |
CBall2D | Aim: Model of the concept StarShaped represents any circle in the plane |
CBall3D | Aim: Model of the concept StarShaped3D represents any Sphere in the space |
CBidirectionalCategory | |
CBidirectionalSegmentComputer | |
CBinomialConvolver | Aim: This class represents a 2D contour convolved by some binomial. It computes first and second order derivatives so as to be able to estimate tangent and curvature. In particular, it smoothes digital contours but could be used for other kind of contours |
CBinomialConvolverEstimator | Aim: This class encapsulates a BinomialConvolver and a functor on BinomialConvolver so as to be a model of CCurveLocalGeometricEstimator |
CBits | |
CBLUELocalLengthEstimator | Aim: Best Linear Unbiased Two step length estimator |
CBoard2D | Aim: This class specializes a 'Board' class so as to display DGtal objects more naturally (with <<). The user has simply to declare a Board2D object and uses stream operators to display most digital objects. Furthermore, one can use this class to modify the current style for drawing |
CBoard3D | The class Board3D is a type of Display3D which export the figures in the format OBJ/MTL when calling the method saveOBJ |
CBoard3DTo2D | Class for PDF, PNG, PS, EPS, SVG export drawings with Cairo with 3D->2D projection |
CBoard3DTo2DFactory | Factory for GPL Display3D: |
CBreadthFirstVisitor | Aim: This class is useful to perform a breadth-first exploration of a graph given a starting point or set (called initial core) |
CC2x2DetComputer | Aim: This concept gathers all models that are able to compute the (sign of the) determinant of a 2x2 matrix with integral entries |
CCameraDirection | CameraDirection class to set camera direction |
CCameraPosition | CameraPosition class to set camera position |
CCameraUpVector | CameraUpVector class to set camera up-vector |
CCameraZNearFar | CameraZNearFar class to set near and far distance |
CCanonicCellEmbedder | Aim: A trivial embedder for signed and unsigned cell, which corresponds to the canonic injection of cell centroids into Rn |
CCanonicDigitalSurfaceEmbedder | Aim: A trivial embedder for digital surfaces, which corresponds to the canonic injection of cell centroids into Rn |
CCanonicEmbedder | Aim: A trivial embedder for digital points, which corresponds to the canonic injection of Zn into Rn |
CCanonicSCellEmbedder | Aim: A trivial embedder for signed cell, which corresponds to the canonic injection of cell centroids into Rn |
CCBidirectionalIteratorArchetype | An archetype of BidirectionalIterator |
CCConstBidirectionalIteratorArchetype | An archetype of ConstBidirectionalIterator |
CCForwardIteratorArchetype | An archetype of ForwardIterator |
CChordGenericNaivePlaneComputer | Aim: A class that recognizes pieces of digital planes of given axis width. When the width is 1, it corresponds to naive planes. Contrary to ChordNaivePlaneComputer, the axis is not specified at initialization of the object. This class uses three instances of ChordNaivePlaneComputer, one per axis |
►CChordGenericStandardPlaneComputer | Aim: A class that recognizes pieces of digital planes of given diagonal width. When the width is \(1 \times \sqrt{3}\), it corresponds to standard planes. Contrary to ChordStandardPlaneComputer, the axis is not specified at initialization of the object. This class uses four instances of ChordStandardPlaneComputer of axis z, by transforming points \((x,y,z)\) to \((x \pm z, y \pm z, z)\) |
CTransform | |
►CChordNaivePlaneComputer | Aim: A class that contains the chord-based algorithm for recognizing pieces of digital planes of given axis width [ Gerard, Debled-Rennesson, Zimmermann, 2005 ]. When the width is 1, it corresponds to naive planes. The axis is specified at initialization of the object |
CState | |
CCircleFrom2Points | Aim: Represents a circle that passes through a given point and that is thus uniquely defined by two other points. It is able to return for any given point its signed distance to itself |
CCircleFrom3Points | Aim: Represents a circle uniquely defined by three 2D points and that is able to return for any given 2D point its signed distance to itself |
CCirculator | Aim: Provides an adapter for classical iterators that can iterate through the underlying data structure as in a loop. The increment (resp. decrement) operator encapsulates the validity test and the assignement to the begin (resp. end) iterator of a given range, when the end (resp. beginning) has been reached. For instance, the pre-increment operator does: |
CCirculatorType | |
CClippingPlane | Class for adding a Clipping plane through the Viewer3D stream. Realizes the concept CDrawableWithViewer3D |
CClock | |
►CClone | Aim: This class encapsulates its parameter class to indicate that the given parameter is required to be duplicated (generally, this is done to have a longer lifetime than the function itself). On one hand, the user is reminded of the possible cost of duplicating the argument parameter, while he is also aware that the lifetime of the parameter is not a problem for the function. On the other hand, the Clone class is smart enough to enforce duplication only if needed. Substantial speed-up can be achieve through this mechanism |
CTempPtr | Internal class that is used for a late deletion of an acquired pointer |
CClosedIntegerHalfPlane | Aim: A half-space specified by a vector N and a constant c. The half-space is the set \( \{ P \in Z^2, N.P \le c \} \) |
CCOBAGenericNaivePlaneComputer | Aim: A class that recognizes pieces of digital planes of given axis width. When the width is 1, it corresponds to naive planes. Contrary to COBANaivePlaneComputer, the axis is not specified at initialization of the object. This class uses three instances of COBANaivePlaneComputer, one per axis |
►CCOBAGenericStandardPlaneComputer | Aim: A class that recognizes pieces of digital planes of given axis width. When the diagonal width is \( 1 \times \sqrt{3} \), it corresponds to standard planes. Contrary to COBANaivePlaneComputer, the axis is not specified at initialization of the object. This class uses four instances of COBANaivePlaneComputer of axis z, by transforming points \((x,y,z)\) to \((x \pm z, y \pm z, z)\) |
CTransform | |
►CCOBANaivePlaneComputer | Aim: A class that contains the COBA algorithm (Emilie Charrier, Lilian Buzer, DGCI2008) for recognizing pieces of digital planes of given axis width. When the width is 1, it corresponds to naive planes. The axis is specified at initialization of the object |
CState | |
CColMajorStorage | Tag (empty structure) specifying a col-major storage order |
CColor | Structure representing an RGB triple with alpha component |
CColorBrightnessColorMap | Aim: This class template may be used to (linearly) convert scalar values in a given range into a color with given lightness |
CCompareLocalEstimators | Aim: Functor to compare two local geometric estimators |
CConnectivityException | |
CConstAlias | Aim: This class encapsulates its parameter class so that to indicate to the user that the object/pointer will be only const aliased (and hence left unchanged). Therefore the user is reminded that the argument parameter is given to the function without any additional cost and may not be modified, while he is aware that the lifetime of the argument parameter must be at least as long as the object itself. Note that an instance of ConstAlias<T> is itself a light object (it holds only an enum and a pointer) |
CConstImageAdapter | Aim: implements a const image adapter with a given domain (i.e. a subdomain) and 2 functors : g for domain, f for accessing point values |
CConstIteratorAdapter | This class adapts any iterator so that operator* returns another element than the one pointed to by the iterator |
CConstRangeAdapter | Aim: model of CConstBidirectionalRange that adapts any range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it (in a read-only manner) |
CConstRangeFromPointAdapter | Aim: model of CConstBidirectionalRangeFromPoint that adapts any bidirectional range and provides services to iterate over it (in a read-only manner) |
CContainerCategory | |
CContainerTraits | Defines default container traits for arbitrary types |
CContainerTraits< boost::unordered_map< Value, T, Hash, Pred, Alloc > > | Defines container traits for boost::unordered_map<> |
CContainerTraits< boost::unordered_multimap< Value, T, Hash, Pred, Alloc > > | Defines container traits for boost::unordered_multimap<> |
CContainerTraits< boost::unordered_multiset< Value, Hash, Pred, Alloc > > | Defines container traits for boost::unordered_multiset<> |
CContainerTraits< boost::unordered_set< Value, Hash, Pred, Alloc > > | Defines container traits for boost::unordered_set<> |
CContainerTraits< CubicalComplex< TKSpace, TCellContainer > > | |
CContainerTraits< std::array< T, N > > | Defines container traits for std::array<> |
CContainerTraits< std::deque< T, Alloc > > | Defines container traits for std::deque<> |
CContainerTraits< std::forward_list< T, Alloc > > | Defines container traits for std::forward_list<> |
CContainerTraits< std::list< T, Alloc > > | Defines container traits for std::list<> |
CContainerTraits< std::map< Key, T, Compare, Alloc > > | Defines container traits for std::map<> |
CContainerTraits< std::multimap< Key, T, Compare, Alloc > > | Defines container traits for std::multimap<> |
CContainerTraits< std::multiset< T, Compare, Alloc > > | Defines container traits for std::multiset<> |
CContainerTraits< std::set< T, Compare, Alloc > > | Defines container traits for std::set<> |
CContainerTraits< std::unordered_map< Key, T, Hash, Pred, Alloc > > | Defines container traits for std::unordered_map<> |
CContainerTraits< std::unordered_multimap< Key, T, Hash, Pred, Alloc > > | Defines container traits for std::unordered_multimap<> |
CContainerTraits< std::unordered_multiset< Key, Hash, Pred, Alloc > > | Defines container traits for std::unordered_multiset<> |
CContainerTraits< std::unordered_set< Key, Hash, Pred, Alloc > > | Defines container traits for std::unordered_set<> |
CContainerTraits< std::vector< T, Alloc > > | Defines container traits for std::vector<> |
CContourHelper | Aim: a helper class to process sequences of points |
CCountedConstPtrOrConstPtr | Aim: Smart or simple const pointer on T . It can be a smart pointer based on reference counts or a simple pointer on T depending either on a boolean value given at construction or on the constructor used. In the first case, we will call this pointer object smart, otherwise we will call it simple |
►CCountedPtr | Aim: Smart pointer based on reference counts |
CCounter | |
CCountedPtrOrPtr | Aim: Smart or simple pointer on T. It can be a smart pointer based on reference counts or a simple pointer on T depending either on a boolean value given at construction or on the constructor used. In the first case, we will call this pointer object smart, otherwise we will call it simple |
CCowPtr | Aim: Copy on write shared pointer |
CCSinglePassIteratorArchetype | An archetype of SingePassIterator |
CCubicalCellData | |
►CCubicalComplex | Aim: This class represents an arbitrary cubical complex living in some Khalimsky space. Cubical complexes are sets of cells of different dimensions related together with incidence relations. Two cells in a cubical complex are incident if and only if they are incident in the surrounding Khalimsky space. In other words, cubical complexes are defined here as subsets of Khalimsky spaces |
CConstIterator | |
CDefaultCellMapIteratorPriority | |
CIterator | |
CCurvatureFromBinomialConvolverFunctor | Aim: This class is a functor for getting the curvature of a binomial convolver |
CCurvatureFromDCAEstimator | |
CCurvatureFromDSSEstimator | |
CCurvatureFromDSSLengthEstimator | |
CCustomColors | Custom style class redefining the pen color and the fill color. You may use Board2D::Color::None for transparent color |
CCustomColors3D | |
CCustomFillColor | Custom style class redefining the fill color. You may use Board2D::Color::None for transparent color |
CCustomPen | Custom style class redefining the pen attributes. You may use Board2D::Color::None for transparent color |
CCustomPenColor | Custom style class redefining the pen color. You may use Board2D::Color::None for transparent color |
CCustomStyle | |
CCustomStyle3D | Modifier class in a Display3D stream. Useful to choose your own style for a given class. Realizes the concept CDrawableWithDisplay3D |
CDefaultConstImageRange | Aim: model of CConstBidirectionalRangeFromPoint that adapts the domain of an image in order to iterate over the values associated to its domain points (in a read-only as well as a write-only manner) |
CDefaultImageRange | Aim: model of CConstBidirectionalRangeFromPoint and CBidirectionalRangeWithWritableIteratorFromPoint that adapts the domain of an image in order to iterate over the values associated to its domain points (in a read-only as well as a write-only manner) |
CDepthFirstVisitor | Aim: This class is useful to perform a depth-first exploration of a graph given a starting point or set (called initial core) |
CDicomReader | Aim: Import a 3D DICOM image from file series |
CDigitalMetricAdapter | Aim: simple adapter class which adapts any models of concepts::CMetricSpace to a model of concepts::CDigitalMetricSpace |
►CDigitalSetBoundary | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as the boundary of a given digital set |
CTracker | |
CDigitalSetByAssociativeContainer | Aim: A wrapper class around a STL associative container for storing sets of digital points within some given domain |
CDigitalSetBySTLSet | Aim: A container class for storing sets of digital points within some given domain |
CDigitalSetBySTLVector | Aim: Realizes the concept CDigitalSet by using the STL container std::vector |
CDigitalSetConverter | Aim: Utility class to convert between types of sets |
CDigitalSetDomain | Aim: Constructs a domain limited to the given digital set |
CDigitalSetFromMap | Aim: An adapter for viewing an associative image container like ImageContainerBySTLMap as a simple digital set. This class is merely based on an aliasing pointer on the image, which must exists elsewhere |
CDigitalSetInserter | Aim: this output iterator class is designed to allow algorithms to insert points in the digital set. Using the assignment operator, even when dereferenced, causes the digital set to insert a point |
CDigitalSetSelector | Aim: Automatically defines an adequate digital set type according to the hints given by the user |
CDigitalShapesCSG | Aim: Constructive Solid Geometry (CSG) between models of CDigitalBoundedShape and CDigitalOrientedShape Use CSG operation (union, intersection, minus) from a shape of Type ShapeA with one (or more) shapes of Type ShapeB. Can combine differents operations. Limitations: Since we don't have a class derived by all shapes, operations can be done by only one type of shapes. Use CSG of CSG to go beyond this limitation |
►CDigitalSurface | Aim: Represents a set of n-1-cells in a nD space, together with adjacency relation between these cells. Therefore, a digital surface is a pure cubical complex (model of CCubicalComplex), made of k-cells, 0 <= k < n. This complex is generally not a manifold (i.e. a kind of surface), except when it has the property of being well-composed |
CArc | |
CEdge | |
CFace | |
CSurfelMap | |
CVertexMap | |
CDigitalSurface2DSlice | Aim: Represents a 2-dimensional slice in a DigitalSurface. In a sense, it is a 4-connected contour, open or not. To be valid, it must be connected to some digital surface and a starting surfel |
CDigitalSurfaceConvolver | |
CDigitalSurfaceConvolver< TFunctor, TKernelFunctor, TKSpace, TDigitalKernel, 2 > | |
CDigitalSurfaceConvolver< TFunctor, TKernelFunctor, TKSpace, TDigitalKernel, 3 > | |
CDigitalSurfaceEmbedderWithNormalVectorEstimator | Aim: Combines a digital surface embedder with a normal vector estimator to get a model of CDigitalSurfaceEmbedder and CWithGradientMap. (also default constructible, copy constructible, assignable) |
CDigitalSurfaceEmbedderWithNormalVectorEstimatorGradientMap | |
CDigitalTopology | Aim: Represents a digital topology as a couple of adjacency relations |
CDigitalTopologyTraits | Aim: the traits classes for DigitalTopology types |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 1 >, MetricAdjacency< TSpace, 2 >, 2 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (4,8) |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 1 >, MetricAdjacency< TSpace, 2 >, 3 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (6,18) |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 1 >, MetricAdjacency< TSpace, 3 >, 3 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (6,26) |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 2 >, MetricAdjacency< TSpace, 1 >, 2 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (8,4) |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 2 >, MetricAdjacency< TSpace, 1 >, 3 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (18,6) |
CDigitalTopologyTraits< MetricAdjacency< TSpace, 3 >, MetricAdjacency< TSpace, 1 >, 3 > | Aim: Specialization of the traits classes for DigitalTopology types for any 2D Space, for topology (26,6) |
►CDiscreteExteriorCalculus | Aim: DiscreteExteriorCalculus represents a calculus in the dec package. This is the main structure in the dec package. This is used to describe the space on which the dec is build and to compute various operators. Once operators or kforms are created, this structure should not be modified |
CProperty | Holds size 'primal_size', 'dual_size', 'index' and 'flipped' for each cell of the DEC object. To avoid inserting both positive and negative cells in a DEC object, only non signed cells are stored internally |
CDiscreteExteriorCalculusFactory | Aim: This class provides static members to create DEC structures from various other DGtal structures |
CDiscreteExteriorCalculusSolver | Aim: This wraps a linear algebra solver around a discrete exterior calculus |
CDisplay2DFactory | Factory for Display2D: |
►CDisplay3D | Aim: This semi abstract class defines the stream mechanism to display 3d primitive (like BallVector, DigitalSetBySTLSet, Object ...). The class Viewer3D and Board3DTo2D implement two different ways to display 3D objects. The first one (Viewer3D), permits an interactive visualisation (based on OpenGL ) and the second one (Board3dto2d) provides 3D visualisation from 2D vectorial display (based on the CAIRO library) |
CBallD3D | |
CClippingPlaneD3D | |
CCommonD3D | |
CCubeD3D | |
CLineD3D | |
CPolygonD3D | |
CQuadD3D | |
CSelectCallbackFctStore | |
CTriangleD3D | |
CDisplay3DFactory | Factory for GPL Display3D: |
►CDistanceBreadthFirstVisitor | Aim: This class is useful to perform an exploration of a graph given a starting point or set (called initial core) and a distance criterion |
CNode | |
CDistanceFromDCAEstimator | |
CDistanceFunctorFromPoint | |
CDistanceTransformation | Aim: Implementation of the linear in time distance transformation for separable metrics |
►CDomainAdjacency | Aim: Given a domain and an adjacency, limits the given adjacency to the specified domain for all adjacency and neighborhood computations |
CVertexMap | |
CDrawableWithBoard2D | |
CDrawableWithBoard3DTo2D | |
CDrawableWithDisplay3D | |
CDrawWithBoard3DTo2DModifier | Base class specifying the methods for classes which intend to modify a Viewer3D stream |
CDrawWithBoardModifier | |
CDrawWithDisplay3DModifier | Base class specifying the methods for classes which intend to modify a Viewer3D stream |
CDrawWithViewer3DModifier | Base class specifying the methods for classes which intend to modify a Viewer3D stream |
►CDSLSubsegment | Aim: Given a Digital Straight line and two endpoints A and B on this line, compute the minimal characteristics of the digital subsegment [AB] in logarithmic time. Two algorithms are implemented: one is based on the local computation of lower and upper convex hulls, the other is based on a dual transformation and uses the Farey fan. Implementation requires that the DSL lies in the first octant (0 <= a <= b) |
CRayC | |
CDSSLengthEstimator | Aim: a model of CGlobalCurveEstimator that segments the digital curve into DSS and computes the length of the resulting (not uniquely defined) polygon |
CDummyObject | |
CDynamicBidirectionalSegmentComputer | |
CDynamicSegmentComputer | |
CEigenDecomposition | Aim: This class provides methods to compute the eigen decomposition of a matrix. Its objective is to replace a specialized matrix library when none are available |
CEigenLinearAlgebraBackend | Aim: Provide linear algebra backend using Eigen dense and sparse matrix as well as dense vector. 6 linear solvers available: |
CEllipse2D | Aim: Model of the concept StarShaped represents any ellipse in the plane |
CEstimatorCache | Aim: this class adapts any local surface estimator to cache the estimated values in a associative container (Surfel <-> estimated value) |
CEuclideanShapesCSG | Aim: Constructive Solid Geometry (CSG) between models of CEuclideanBoundedShape and CEuclideanOrientedShape Use CSG operation (union, intersection, minus) from a shape of Type ShapeA with one (or more) shapes of Type ShapeB. Can combine differents operations. Limitations: Since we don't have a class derived by all shapes, operations can be done by only one type of shapes. Use CSG of CSG to go beyond this limitation |
CExactPredicateLpPowerSeparableMetric | Aim: implements weighted separable l_p metrics with exact predicates |
CExactPredicateLpPowerSeparableMetric< TSpace, 2, TPromoted > | |
CExactPredicateLpSeparableMetric | Aim: implements separable l_p metrics with exact predicates |
CExactPredicateLpSeparableMetric< TSpace, 2, TRawValue > | |
CExpander | Aim: This class is useful to visit an object by adjacencies, layer by layer |
►CExplicitDigitalSurface | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as connected surfels. The shape is determined by a predicate telling whether a given surfel belongs or not to the shape boundary. Compute once the boundary of the surface with a tracking |
CTracker | |
CFiltered2x2DetComputer | Aim: Class that provides a way of computing the sign of the determinant of a 2x2 matrix from its four coefficients, ie |
CFlower2D | Aim: Model of the concept StarShaped represents any flower with k-petals in the plane |
CFMM | Aim: Fast Marching Method (FMM) for nd distance transforms |
CForwardCategory | |
CForwardSegmentComputer | |
CFP | Aim: Computes the faithful polygon (FP) of a range of 4/8-connected 2D Points |
CFPLengthEstimator | Aim: a model of CGlobalCurveEstimator that computes the length of a digital curve using its FP (faithful polygon) |
►CFrechetShortcut | Aim: On-line computation Computation of the longest shortcut according to the FrÃ©chet distance for a given error. See related article: Sivignon, I., (2011). A Near-Linear Time Guaranteed Algorithm for Digital Curve Simplification under the FrÃ©chet Distance. DGCI 2011. Retrieved from http://link.springer.com/chapter/10.1007/978-3-642-19867-0_28 |
►CBackpath | |
Cocculter_attributes | |
CCone | |
CTools | |
►CFreemanChain | |
CCodesRange | Aim: model of CRange that provides services to (circularly)iterate over the letters of the freeman chain |
CConstIterator | |
CFrontInsertionSequenceToStackAdapter | Aim: This class implements a dynamic adapter to an instance of a model of front insertion sequence in order to get a stack interface. This class is a model of CStack |
CFunctorOnCells | Aim: Convert a functor on Digital Point to a Functor on Khalimsky Cell |
CGaussDigitizer | Aim: A class for computing the Gauss digitization of some Euclidean shape, i.e. its intersection with some \( h_1 Z \times h_2 Z \times \cdots \times h_n Z \). Note that the real point (0,...,0) is mapped onto the digital point (0,...,0) |
CGenericReader | Aim: Provide a mechanism to load with the bestloader according to an image (2D or 3D) filename (by parsing the extension) |
CGenericReader< TContainer, 2, DGtal::uint32_t > | |
CGenericReader< TContainer, 2, TValue > | |
CGenericReader< TContainer, 3, DGtal::uint32_t > | |
CGenericReader< TContainer, 3, DGtal::uint64_t > | |
CGenericReader< TContainer, 3, TValue > | |
CGenericWriter | Aim: Provide a mechanism to save image (2D or 3D) into file with the best saver loader according to an filename (by parsing the extension) |
CGenericWriter< TContainer, 2, TValue, HueShadeColorMap< TValue > > | |
CGenericWriter< TContainer, 2, TValue, TFunctor > | |
CGenericWriter< TContainer, 2, unsigned char, TFunctor > | |
CGenericWriter< TContainer, 3, DGtal::uint64_t, TFunctor > | |
CGenericWriter< TContainer, 3, TValue, TFunctor > | |
CGenericWriter< TContainer, 3, unsigned char, TFunctor > | |
CGradientColorMap | Aim: This class template may be used to (linearly) convert scalar values in a given range into a color in a gradient defined by two or more colors |
►CGraphVisitorRange | Aim: Transforms a graph visitor into a single pass input range |
CGenericConstIterator | |
CNodeAccessor | |
CVertexAccessor | |
CGrayscaleColorMap | Aim: This class template may be used to (linearly) convert scalar values in a given range into gray levels |
►CGreedySegmentation | Aim: Computes the greedy segmentation of a range given by a pair of ConstIterators. The last element of a given segment is the first one one of the next segment |
CSegmentComputerIterator | Aim: Specific iterator to visit all the segments of a greedy segmentation |
CGridCurve | Aim: describes, in a cellular space of dimension n, a closed or open sequence of signed d-cells (or d-scells), d being either equal to 1 or (n-1) |
CH5DSpecializations | Aim: implements HDF5 reading and writing for specialized type T |
CH5DSpecializations< TImageFactory, DGtal::int32_t > | Aim: implements HDF5 reading and writing for specialized type DGtal::int32_t |
CH5DSpecializations< TImageFactory, DGtal::int64_t > | Aim: implements HDF5 reading and writing for specialized type DGtal::int64_t |
CH5DSpecializations< TImageFactory, DGtal::uint8_t > | Aim: implements HDF5 reading and writing for specialized type DGtal::uint8_t |
CH5DSpecializations< TImageFactory, double > | Aim: implements HDF5 reading and writing for specialized type double |
CHDF5Reader | Aim: Import a HDF5 file |
CHDF5Writer | Aim: Export an Image with the HDF5 format |
CHistogram | Aim: Represents a typical histogram in statistics, which is a discrete estimate of the probability distribution of a continuous variable |
CHueShadeColorMap | Aim: This class template may be used to (linearly) convert scalar values in a given range into a color in a cyclic hue shade colormap, maybe aka rainbow color map. This color map is suitable, for example, to colorize distance functions. By default, only one hue cycle is used |
►CHyperRectDomain | Aim: Parallelepidec region of a digital space, model of a 'CDomain' |
CConstSubRange | Aim: range through some subdomain of all the points in the domain. Defines a constructor taking a domain in parameter plus some additional parameters to specify the subdomain, begin and end methods returning ConstIterator, and rbegin and rend methods returning ConstReverseIterator |
CHyperRectDomain_Iterator | |
CHyperRectDomain_subIterator | |
CImage | Aim: implements association bewteen points lying in a digital domain and values |
CImageAdapter | Aim: implements an image adapter with a given domain (i.e. a subdomain) and 3 functors : g for domain, f for accessing point values and f-1 for writing point values |
CImageCache | Aim: implements an images cache with 'read and write' policies |
CImageCacheReadPolicyFIFO | Aim: implements a 'FIFO' read policy cache |
CImageCacheReadPolicyLAST | Aim: implements a 'LAST' read policy cache |
CImageCacheWritePolicyWB | Aim: implements a 'WB (Write-back or Write-behind)' write policy cache |
CImageCacheWritePolicyWT | Aim: implements a 'WT (Write-through)' write policy cache |
CImageContainerByITKImage | Aim: implements a model of CImageContainer using a ITK Image |
CImageContainerBySTLMap | |
►CImageContainerBySTLVector | |
CSpanIterator | |
CImageFactoryFromHDF5 | Aim: implements a factory from an HDF5 file |
CImageFactoryFromImage | Aim: implements a factory to produce images from a "bigger/original" one according to a given domain |
CImageFromSet | Aim: Define utilities to convert a digital set into an image |
CImageLinearCellEmbedder | Aim: a cellular embedder for images. (default constructible, copy constructible, assignable). Model of CCellEmbedder |
CImageSelector | Aim: Automatically defines an adequate image type according to the hints given by the user |
CImageToConstantFunctor | |
CImplicitBall | Aim: model of CEuclideanOrientedShape and CEuclideanBoundedShape concepts to create a ball in nD. |
►CImplicitDigitalSurface | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as the boundary of an implicitly define shape. Compute once the boundary of the surface with a tracking |
CTracker | |
CImplicitFunctionDiff1LinearCellEmbedder | Aim: a cellular embedder for implicit functions, (default constructible, copy constructible, assignable). Model of CCellEmbedder and CWithGradientMap |
CImplicitFunctionDiff1LinearCellEmbedderGradientMap | Forward declaration |
CImplicitFunctionLinearCellEmbedder | Aim: a cellular embedder for implicit functions, (default constructible, copy constructible, assignable). Model of CCellEmbedder |
CImplicitHyperCube | Aim: model of CEuclideanOrientedShape and CEuclideanBoundedShape concepts to create an hypercube in nD. |
CImplicitNorm1Ball | Aim: model of CEuclideanOrientedShape and CEuclideanBoundedShape concepts to create a ball for the L_1 norm in nD |
CImplicitPolynomial3Shape | Aim: model of CEuclideanOrientedShape concepts to create a shape from a polynomial |
CImplicitRoundedHyperCube | Aim: model of CEuclideanOrientedShape and CEuclideanBoundedShape concepts to create a rounded hypercube in nD. |
►CIndexedListWithBlocks | Aim: Represents a mixed list/array structure which is useful in some context. It is essentially a list of blocks |
CAnyBlock | |
CBlockPointer | Forward declaration |
CConstIterator | |
CFirstBlock | |
CIterator | |
CValueOrBlockPointer | Used in blocks to finish it or to point to the next block |
CInexactPredicateLpSeparableMetric | Aim: implements separable l_p metrics with approximated predicates |
CInfiniteNumberException | |
CInGeneralizedDiskOfGivenRadius | Aim: This class implements an orientation functor that provides a way to determine the position of a given point with respect to the unique circle passing by the same two given points and whose radius and orientation is given |
CInHalfPlaneBy2x2DetComputer | Aim: Class that implements an orientation functor, ie. it provides a way to compute the orientation of three given 2d points. More precisely, it returns: |
CInHalfPlaneBySimple3x3Matrix | Aim: Class that implements an orientation functor, ie. it provides a way to compute the orientation of three given 2d points. More precisely, it returns: |
CInputException | |
CInputIteratorWithRankOnSequence | Aim: Useful to create an iterator that returns a pair (value,rank) when visiting a sequence. The sequence is smartly copied within the iterator. Hence, the given sequence need not to persist during the visit. Since it is only an input sequence, it is not necessary to give a valid sequence when creating the end() iterator |
CIntegerComputer | Aim: This class gathers several types and methods to make computation with integers |
CIntegralInvariantCovarianceEstimator | Aim: This class implement an Integral Invariant estimator which computes for each surfel the covariance matrix of the intersection of the shape with a ball of given radius centered on the surfel |
CIntegralInvariantVolumeEstimator | Aim: This class implement an Integral Invariant estimator which computes for each surfel the volume of the intersection of the shape with a ball of given radius centered on the surfel |
CIOException | |
CIsAssociativeContainer | |
CIsCirculator | Aim: Checks whether type IC is a circular or a classical iterator. Static value set to 'true' for a circulator, 'false' otherwise |
CIsContainer | |
CIsMultipleAssociativeContainer | |
CIsOrderedAssociativeContainer | |
CIsPairAssociativeContainer | |
CIsSequenceContainer | |
CIsSimpleAssociativeContainer | |
CIsUniqueAssociativeContainer | |
CIsUnorderedAssociativeContainer | |
CIteratorAdapter | This class adapts any lvalue iterator so that operator* returns a member on the element pointed to by the iterator, instead the element itself |
CIteratorCirculatorTraits | Aim: Provides nested types for both iterators and circulators: Type, Category, Value, Difference, Pointer and Reference |
CIteratorCirculatorTraits< T * > | |
CIteratorCirculatorTraits< T const * > | |
CIteratorCirculatorType | Aim: Provides the type of IC as a nested type: either IteratorType or CirculatorType |
CIteratorCompletion | Aim: Class that uses CRTP to add reverse iterators and ranges to a derived class |
CIteratorCompletionTraits | Aim: Traits that must be specialized for each IteratorCompletion derived class |
►CIteratorCompletionTraits< ArrayImageAdapter< TArrayIterator, TDomain > > | [IteratorCompletionTraits] |
CDistanceFunctor | |
CIteratorType | |
CITKIOTrait | Aim: Provide type trait for ITK reader and ITK writer |
CITKIOTrait< bool > | |
CITKReader | Aim: Import a 2D/3D Image using the ITK formats |
CITKWriter | Export a 2D/3D Image using the ITK formats |
CIVector | |
CIVector< T, TAlloc, true > | |
CKanungoNoise | Aim: From a point predicate (model of concepts::CPointPredicate), this class constructs another point predicate as a noisy version of the input one |
CKForm | Aim: KForm represents discrete kforms in the dec package |
CKhalimskyCell | Represents an (unsigned) cell in a cellular grid space by its Khalimsky coordinates |
CKhalimskyPreCell | |
►CKhalimskyPreSpaceND | Aim: This class is a model of CPreCellularGridSpaceND. It represents the cubical grid as a cell complex, whose cells are defined as an array of integers. The topology of the cells is defined by the parity of the coordinates (even: closed, odd: open) |
CAnyCellCollection | |
CCellMap | |
CSCellMap | |
CSurfelMap | |
►CKhalimskySpaceND | Aim: This class is a model of CCellularGridSpaceND. It represents the cubical grid as a cell complex, whose cells are defined as an array of integers. The topology of the cells is defined by the parity of the coordinates (even: closed, odd: open) |
CCellMap | |
CSCellMap | |
CSurfelMap | |
CKhalimskySpaceNDHelper | |
CL1LengthEstimator | Aim: a simple model of CGlobalCurveEstimator that compute the length of a curve using the l_1 metric (just add 1/h for every step) |
CL1LocalDistance | Aim: Class for the computation of the L1-distance at some point p, from the available distance values of some points lying in the 1-neighborhood of p (ie. points at a L1-distance to p equal to 1) |
CL2FirstOrderLocalDistance | Aim: Class for the computation of the Euclidean distance at some point p, from the available distance values of some points lying in the 1-neighborhood of p (ie. points at a L1-distance to p equal to 1) |
CL2FirstOrderLocalDistanceFromCells | Aim: Class for the computation of the Euclidean distance at some point p, from the available distance values in the neighborhood of p. Contrary to L2FirstOrderLocalDistance, the distance values are not available from the points adjacent to p but instead from the (d-1)-cells lying between p and these points |
CL2SecondOrderLocalDistance | Aim: Class for the computation of the Euclidean distance at some point p, from the available distance values of some points lying in the neighborhood of p, such that only one of their coordinate differ from the coordinates of p by at most two |
►CLabelledMap | Aim: Represents a map label -> data, where the label is an integer between 0 and a constant L-1. It is based on a binary coding of labels and a mixed list/array structure. The assumption is that the number of used labels is much less than L. The objective is to minimize the memory usage |
C__AnyBlock | |
C__FirstBlock | |
CBlockConstIterator | |
CBlockIterator | |
CBlockPointer | Forward declaration |
CConstIterator | |
CDataOrBlockPointer | Used in first block to finish it or to point to the next block |
CKeyCompare | Key comparator class. Always natural ordering |
CValueCompare | Value comparator class. Always natural ordering between keys |
►CLabels | Aim: Stores a set of labels in {O..L-1} as a sequence of bits |
CConstEnumerator | |
CLambdaMST2D | Aim: Simplify creation of Lambda MST tangent estimator |
CLambdaMST2DEstimator | |
CLambdaMST3D | Aim: Simplify creation of Lambda MST tangent estimator |
CLambdaMST3DEstimator | |
CLatticePolytope2D | Aim: Represents a 2D polytope, i.e. a convex polygon, in the two-dimensional digital plane. The list of points must follow the clockwise ordering |
►CLighterSternBrocot | Aim: The Stern-Brocot tree is the tree of irreducible fractions. This class allows to construct it progressively and to navigate within fractions in O(1) time for most operations. It is well known that the structure of this tree is a coding of the continued fraction representation of fractions |
CFraction | This fraction is a model of CPositiveIrreducibleFraction |
CNode | |
►CLightExplicitDigitalSurface | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as connected surfels. The shape is determined by a predicate telling whether a given surfel belongs or not to the shape boundary. The whole boundary is not precomputed nor stored. You may use an iterator to visit it |
CTracker | |
CVertexMap | |
►CLightImplicitDigitalSurface | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as the boundary of an implicitly define shape. The whole boundary is not precomputed nor stored. You may use an iterator to visit it |
CTracker | |
CVertexMap | |
►CLightSternBrocot | Aim: The Stern-Brocot tree is the tree of irreducible fractions. This class allows to construct it progressively and to navigate within fractions in O(1) time for most operations. It is well known that the structure of this tree is a coding of the continued fraction representation of fractions |
CFraction | This fraction is a model of CPositiveIrreducibleFraction |
CNode | |
CLinearAlgebra | Aim: A utility class that contains methods to perform integral linear algebra |
CLinearizer | Aim: Linearization and de-linearization interface for domains |
CLinearizer< HyperRectDomain< TSpace >, TStorageOrder > | Aim: Linearization and de-linearization interface for HyperRectDomain |
CLinearOperator | Aim: LinearOperator represents discrete linear operator between discrete kforms in the DEC package |
CLInfLocalDistance | Aim: Class for the computation of the LInf-distance at some point p, from the available distance values of some points lying in the 1-neighborhood of p (ie. points at a L1-distance to p equal to 1) |
CLocalEstimatorFromSurfelFunctorAdapter | Aim: this class adapts any local functor on digital surface element to define a local estimator. This class is model of CDigitalSurfaceLocalEstimator |
CLOG2 | |
CLOG2< 1 > | |
CLOG2< 2 > | |
►CLongvolReader | Aim: implements methods to read a "Longvol" file format (with DGtal::uint64_t value type) |
CHeaderField | |
CLongvolWriter | Aim: Export a 3D Image using the Longvol formats (volumetric image with DGtal::uint64_t value type) |
CMagickReader | Aim: implements methods to read a 2D image using the ImageMagick library |
CMapAssociativeCategory | |
CMeaningfulScaleAnalysis | Aim: This class implements different methods used to define the meaningful scale analysis as proposed in [41] . In particular, it uses the Profile class to represent a multi-scale profile and to compute a meaningful scale. It also permits to get a noise estimation from the given profile |
CMeasure | Aim: Implements a simple measure computation (in the Lesbegue sens) of a set. In dimension 2, it corresponds to the area of the set, to the volume in dimension 3,.. |
CMeasureOfStraightLines | The aim of this class is to compute the measure in the Lebesgues sense of the set of straight lines associated to domains defined as polygons in the (a,b)-parameter space. This parameter space maps the line $ax-y+b=0$ to the point $(a,b)$ |
CMelkmanConvexHull | Aim: This class implements the on-line algorithm of Melkman for the computation of the convex hull of a simple polygonal line (without self-intersection) [Melkman, 1987: [52]] |
CMemoryException | |
►CMesh | Aim: This class is defined to represent a surface mesh through a set of vertices and faces. By using the default constructor, the mesh does not store any color information (it can be changed by setting the default constructor parameter saveFaceColor to 'true') |
CCompPoints | |
CMeshReader | Aim: Defined to import OFF and OFS surface mesh. It allows to import a Mesh object and takes into accouts the optional color faces |
CMeshWriter | Aim: Export a Mesh (Mesh object) in different format as OFF and OBJ) |
►CMetricAdjacency | Aim: Describes digital adjacencies in digital spaces that are defined with the 1-norm and the infinity-norm |
CVertexMap | |
CMLPLengthEstimator | Aim: a model of CGlobalCurveEstimator that computes the length of a digital curve using its MLP (given by the FP) |
CModuloComputer | Implements basic functions on modular arithmetic |
CMorton | Aim: Implements the binary Morton code construction in nD |
CMostCenteredMaximalSegmentEstimator | Aim: A model of CLocalCurveGeometricEstimator that assigns to each element of a (sub)range a quantity estimated from the most centered maximal segment passing through this element |
CMPolynomial | Aim: Represents a multivariate polynomial, i.e. an element of \( K[X_0, ..., X_{n-1}] \), where K is some ring or field |
CMPolynomial< 0, TRing, TAlloc > | Aim: Specialization of MPolynomial for degree 0 |
CMPolynomialDerivativeComputer | |
CMPolynomialDerivativeComputer< 0, 0, Ring, Alloc > | |
CMPolynomialDerivativeComputer< 0, n, Ring, Alloc > | |
CMPolynomialDerivativeComputer< N, 0, Ring, Alloc > | |
CMPolynomialEvaluator | |
CMPolynomialEvaluator< 1, TRing, TAlloc, TX > | |
►CMPolynomialEvaluatorImpl | |
CEvalFun | |
CEvalFun2 | |
►CMPolynomialEvaluatorImpl< 1, TRing, TOwner, TAlloc, TX > | |
CEvalFun | |
CMPolynomialGrammar | |
►CMPolynomialReader | Aim: This class converts a string polynomial expression in a multivariate polynomial |
CExprNodeMaker | |
CMultimapAssociativeCategory | |
CMultipleAssociativeCategory | |
CMultisetAssociativeCategory | |
CMultiStatistics | Aim: This class stores a set of sample values for several variables and can then compute different statistics, like sample mean, sample variance, sample unbiased variance, etc |
CNaive3DDSSComputer | Aim: Dynamic recognition of a 3d-digital straight segment (DSS) |
CNaiveDSL | Aim: This class is an alias of ArithmeticalDSS for naive DSL. It represents a naive digital straight line (DSL), ie. the set of digital points \( (x,y) \in \mathbb{Z}^2 \) such that \( \mu \leq ax - by < \mu + \omega \) with \( a,b,\mu,\omega \in \mathbb{Z} \), \( \gcd(a,b) = 1 \) and \( \omega = \max(|a|,|b|) \). Note that any DSL such that \( \omega = \max(|a|,|b|) \) is simply 8-connected |
CNaiveDSS8 | Aim: This class represents a standard digital straight segment (DSS), ie. the sequence of simply 8-connected digital points contained in a naive digital straight line (DSL) between two points of it. This class is an alias of ArithmeticalDSS |
CNaiveDSS8Computer | Aim: This class is a wrapper around ArithmeticalDSS that is devoted to the dynamic recognition of naive and simply 8-connected digital straight segments (DSS) along any sequence of digital points |
CNegate | |
CNegate< TagFalse > | |
CNegate< TagTrue > | |
CNGon2D | Aim: Model of the concept StarShaped represents any regular k-gon in the plane |
CNormalFromDCAEstimator | |
CNormalVectorEstimatorLinearCellEmbedder | Aim: model of cellular embedder for normal vector estimators on digital surface, (default constructible, copy constructible, assignable) |
CNotContainerCategory | |
CNumberTraits | Aim: The traits class for all models of Cinteger |
CNumberTraits< double > | |
CNumberTraits< float > | |
CNumberTraits< int16_t > | |
CNumberTraits< int32_t > | |
CNumberTraits< int64_t > | |
CNumberTraits< int8_t > | |
CNumberTraits< long double > | |
CNumberTraits< uint16_t > | |
CNumberTraits< uint32_t > | |
CNumberTraits< uint64_t > | |
CNumberTraits< uint8_t > | |
►CObject | Aim: An object (or digital object) represents a set in some digital space associated with a digital topology |
CEdge | |
CVertexMap | |
►COneBalancedWordComputer | Aim: |
CCodeHandler | |
CCodeHandler< TIterator, BidirectionalCategory > | |
CCodeHandler< TIterator, RandomAccessCategory > | |
CConstPointIterator | |
COneItemOutputIterator | Aim: model of output iterator, ie incrementable and writable iterator, which only stores in a variable the last assigned item |
COpInSTLContainers | Aim: Implementation of an adapter for erase and insert methods of STL containers so that they not only work for the iterator type, but also for the reverse_iterator type |
COpInSTLContainers< Container, std::reverse_iterator< typename Container::iterator > > | |
COppositeDuality | |
COppositeDuality< DUAL > | |
COppositeDuality< PRIMAL > | |
COrderedAlphabet | Aim: Describes an alphabet over an interval of (ascii) letters, where the lexicographic order can be changed (shifted, reversed, ...). Useful for the arithmetic minimum length polygon (AMLP) |
COrderedAssociativeCategory | |
COrderedLinearRegression | Description of class 'OrderedLinearRegression' |
COutputIteratorAdapter | Aim: Adapts an output iterator i with a unary functor f, both given at construction, so that the element pointed to by i is updated with a given value through f |
COwningOrAliasingPtr | Aim: This class describes a smart pointer that is, given the constructor called by the user, either an alias pointer on existing data or an owning pointer on a copy |
CPairAssociativeCategory | |
CParallelStrip | Aim: A parallel strip in the space is the intersection of two parallel half-planes such that each half-plane includes the other |
CParametricShapeArcLengthFunctor | Aim: implements a functor that estimates the arc length of a paramtric curve |
CParametricShapeCurvatureFunctor | Aim: implements a functor that computes the curvature at a given point of a parametric shape |
CParametricShapeTangentFunctor | Aim: implements a functor that computes the tangent vector at a given point of a parametric shape |
CParDirCollapse | Aim: Implements thinning algorithms in cubical complexes. The implementation supports any model of cubical complex, for instance a DGtal::CubicalComplex< KhalimskySpaceND< 3, int > >. Three approaches are provided. The first—ParDirCollapse—bases on directional collapse of free pairs of faces. Second—CollapseSurface—is an extension of ParDirCollapse such that faces of dimension one lower than the dimension of the complex are kept. The last approach —CollapseIsthmus—is also an extension of ParDirCollapse such that faces of dimension one lower than the complex are preserved when they do not contain free faces of dimension two lower than the complex. Paper: Chaussard, J. and Couprie, M., Surface Thinning in 3D Cubical Complexes, Combinatorial Image Analysis, (2009) |
CPattern | Aim: This class represents a pattern, i.e. the path between two consecutive upper leaning points on a digital straight line |
CPGMReader | Aim: Import a 2D or 3D using the Netpbm formats (ASCII mode) |
CPGMWriter | Aim: Export a 2D and a 3D Image using the Netpbm PGM formats (ASCII mode) |
CPointListReader | Aim: Implements method to read a set of points represented in each line of a file |
CPointVector | Aim: Implements basic operations that will be used in Point and Vector classes |
CPOW | |
CPOW< X, 0 > | |
CPOW< X, 1 > | |
CPowerMap | Aim: Implementation of the linear in time Power map construction |
CPPMReader | Aim: Import a 2D or 3D using the Netpbm formats (ASCII mode) |
CPPMWriter | Aim: Export a 2D and a 3D Image using the Netpbm PPM formats (ASCII mode) |
CPreCellDirectionIterator | This class is useful for looping on all "interesting" coordinates of a pre-cell. For instance, surfels in Z3 have two interesting coordinates (the ones spanned by the surfel) |
CPredicateFromOrientationFunctor2 | Aim: Small adapter to models of COrientationFunctor2. It is a model of concepts::CPointPredicate. It is also a ternary predicate on points, useful for basic geometric tasks such as convex hull computation |
CPreimage2D | Aim: Computes the preimage of the 2D Euclidean shapes crossing a sequence of n straigth segments in O(n), with the algorithm of O'Rourke (1981) |
CProfile | Aim: This class can be used to represent a profile (PX, PY) defined from an input set of samples (Xi, Yi). For all sample (Xk, Yk) having the same value Xk, the associated value PY is computed (by default) by the mean of the values Yk. Note that other definitions can be used (MAX, MIN or MEDIAN). Internally each sample abscissa is an instance of DGtal::Statistic |
Cpromote_trait | |
Cpromote_trait< int32_t, int64_t > | |
CRandomAccessCategory | |
CRandomColorMap | Aim: access to random color from a gradientColorMap |
CRawReader | Aim: Raw binary import of an Image |
CRawWriter | Aim: Raw binary export of an Image |
CRayIntersectionPredicate | This class implements various intersection predicates between a ray and a triangle, a quad or a surfel in dimension 3 |
CRealFFT< HyperRectDomain< TSpace >, T > | |
CReducedMedialAxis | Aim: Implementation of the separable medial axis extraction |
CRegularBinner | Aim: Represents an elementary functor that partitions quantities into regular intervals, given a range [min,max] range and a number nb of intervals (each interval is called a bin) |
CRegularPointEmbedder | Aim: A simple point embedder where grid steps are given for each axis. Note that the real point (0,...,0) is mapped onto the digital point (0,...,0) |
CReverseDistanceTransformation | Aim: Implementation of the linear in time reverse distance transformation for separable metrics |
CReverseIterator | This class adapts any bidirectional iterator so that operator++ calls operator-- and vice versa |
CRosenProffittLocalLengthEstimator | Aim: Rosen-Proffitt Length Estimator |
CRowMajorStorage | Tag (empty structure) specifying a row-major storage order |
►CSaturatedSegmentation | Aim: Computes the saturated segmentation, that is the whole set of maximal segments within a range given by a pair of ConstIterators (maximal segments are segments that cannot be included in greater segments) |
CSegmentComputerIterator | Aim: Specific iterator to visit all the maximal segments of a saturated segmentation |
CSegmentComputerTraits | Aim: Provides the category of the segment computer {ForwardSegmentComputer,BidirectionalSegmentComputer, DynamicSegmentComputer, DynamicBidirectionalSegmentComputer} |
CSeparableMetricAdapter | Aim: Adapts any model of CMetric to construct a separable metric (model of CSeparableMetric) |
CSequenceCategory | |
CSetAssociativeCategory | |
CSetFromImage | Aim: Define utilities to convert a digital set into an image |
CSetMode | Modifier class in a Board2D stream. Useful to choose your own mode for a given class. Realizes the concept CDrawableWithBoard2D |
CSetMode3D | Modifier class in a Display3D stream. Useful to choose your own mode for a given class. Realizes the concept CDrawableWithDisplay3D |
CSetName3D | |
►CSetOfSurfels | Aim: A model of CDigitalSurfaceContainer which defines the digital surface as connected surfels. The shape is determined by the set of surfels that composed the surface. The set of surfels is stored in this container |
CTracker | |
CSetSelectCallback3D | |
CSetValueIterator | Aim: implements an output iterator, which is able to write values in an underlying image, by calling its setValue method |
CShapes | Aim: A utility class for constructing different shapes (balls, diamonds, and others) |
CSignal | Aim: Represents a discrete signal, periodic or not. The signal can be passed by value since it is only cloned when modified |
CSignalData | |
CSignedKhalimskyCell | Represents a signed cell in a cellular grid space by its Khalimsky coordinates and a boolean value |
CSignedKhalimskyPreCell | |
CSimple2x2DetComputer | Aim: Small class useful to compute the determinant of a 2x2 matrix from its four coefficients, ie. \( \begin{vmatrix} a & x \\ b & y \end{vmatrix} \) |
CSimpleAssociativeCategory | |
CSimpleConstRange | Aim: model of CConstRange that adapts any range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it (in a read-only manner) |
CSimpleIncremental2x2DetComputer | Aim: Small class useful to compute, in an incremental way, the determinant of a 2x2 matrix from its four coefficients, ie. \( \begin{vmatrix} a & x \\ b & y \end{vmatrix} \) |
CSimpleLinearRegression | Description of class 'SimpleLinearRegression' |
CSimpleMatrix | Aim: implements basic MxN Matrix services (M,N>=1) |
CSimpleMatrixSpecializations | Aim: Implement internal matrix services for specialized matrix size |
CSimpleMatrixSpecializations< TMatrix, 1, 1 > | Aim: |
CSimpleMatrixSpecializations< TMatrix, 2, 2 > | Aim: |
CSimpleMatrixSpecializations< TMatrix, 3, 3 > | Aim: |
CSimpleRandomAccessConstRangeFromPoint | Aim: model of CConstBidirectionalRangeFromPoint that adapts any range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it (in a read-only manner) |
CSimpleRandomAccessRangeFromPoint | Aim: model of CBidirectionalRangeFromPoint that adapts any range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it (in a read-only manner) |
►CSpaceND | Aim: SpaceND is a utility class that defines the fundamental structure of a Digital Space in ND |
CSubcospace | Define the type of a sub co-Space |
CSubspace | Define the type of a subspace |
CSpatialCubicalSubdivision | Aim: This class is a data structure that subdivides a rectangular domains into cubical domains of size \( r^n \) in order to store points into different bins (each cubical domain is a bin, characterized by one coordinate). This data structure may be used for proximity queries, generally to get the points at distance r from a given point |
CSpeedExtrapolator | Aim: Class for the computation of the a speed value at some point p, from the available distance values and speed values of some points lying in the 1-neighborhood of p (ie. points at a L1-distance to p equal to 1) in order to extrapolate a speed field in the normal direction to the interface |
CSphericalAccumulator | Aim: implements an accumulator (as histograms for 1D scalars) adapted to spherical point samples |
CStabbingCircleComputer | Aim: On-line recognition of a digital circular arcs (DCA) defined as a sequence of connected grid edges such that there is at least one (Euclidean) circle that separates the centers of the two incident pixels of each grid edge |
CStabbingLineComputer | Aim: On-line recognition of a digital straight segment (DSS) defined as a sequence of connected grid edges such that there is at least one straight line that separates the centers of the two incident pixels of each grid edge |
CStandardDSL | Aim: This class is an alias of ArithmeticalDSS for standard DSL. It represents a standard digital straight line (DSL), ie. the set of digital points \( (x,y) \in \mathbb{Z}^2 \) such that \( \mu \leq ax - by < \mu + \omega \) with \( a,b,\mu,\omega \in \mathbb{Z} \), \( \gcd(a,b) = 1 \) and \( \omega = |a| + |b| \). Note that any DSL such that \( \omega = |a| + |b| \) is simply 4-connected |
►CStandardDSLQ0 | Aim: Represents a digital straight line with slope in the first quadrant (Q0: x >= 0, y >= 0 ) |
CConstIterator | |
CStandardDSS4 | Aim: This class represents a standard digital straight segment (DSS), ie. the sequence of simply 4-connected digital points contained in a standard digital straight line (DSL) between two points of it. This class is an alias of ArithmeticalDSS |
CStandardDSS4Computer | Aim: This class is a wrapper around ArithmeticalDSS that is devoted to the dynamic recognition of standard and simply 4-connected digital straight segments (DSS) along any sequence of digital points |
CStandardDSS6Computer | Aim: Dynamic recognition of a 3d-digital straight segment (DSS) |
CStarShaped2D | |
CStarShaped3D | |
CStatistic | Aim: This class processes a set of sample values for one variable and can then compute different statistics, like sample mean, sample variance, sample unbiased variance, etc. It is minimalistic for space efficiency. For multiple variables, sample storage and others, see Statistics class |
►CStdMapRebinder | |
CRebinder | |
►CSternBrocot | Aim: The Stern-Brocot tree is the tree of irreducible fractions. This class allows to construct it progressively and to navigate within fractions in O(1) time for most operations. It is well known that the structure of this tree is a coding of the continued fraction representation of fractions |
CFraction | This fraction is a model of CPositiveIrreducibleFraction |
CNode | |
CSTLMapToVertexMapAdapter | Aim: This class adapts any map of the STL to match with the CVertexMap concept |
CStraightLineFrom2Points | Aim: Represents a straight line uniquely defined by two 2D points and that is able to return for any given 2D point its signed distance to itself |
CStyle2DFactory | |
CSurfaces | Aim: A utility class for constructing surfaces (i.e. set of (n-1)-cells) |
CSurfelAdjacency | Aim: Represent adjacencies between surfel elements, telling if it follows an interior to exterior ordering or exterior to interior ordering. It allows tracking of boundaries and of surfaces |
CSurfelNeighborhood | Aim: This helper class is useful to compute the neighboring surfels of a given surfel, especially over a digital surface or over an object boundary. Two signed surfels are incident if they share a common n-2 cell. This class uses a SurfelAdjacency so as to determine adjacent surfels (either looking for them from interior to exterior or inversely) |
CTableReader | Aim: Implements method to read a set of numbers represented in each line of a file |
CTagFalse | |
CTagTrue | |
CTagUnknown | |
CTangentAngleFromDSSEstimator | |
CTangentFromBinomialConvolverFunctor | Aim: This class is a functor for getting the tangent vector of a binomial convolver |
CTangentFromDCAEstimator | |
►CTangentFromDSS2DFunctor | |
CValue | |
►CTangentFromDSS3DFunctor | |
CValue | |
CTangentFromDSSEstimator | |
CTangentVectorFromDSSEstimator | |
CTickedColorMap | Aim: This class adapts any colormap to add "ticks" in the colormap colors |
►CTiledImage | Aim: implements a tiled image from a "bigger/original" one from an ImageFactory |
CTiledIterator | |
CTiledImageBidirectionalConstRangeFromPoint | Aim: model of CConstBidirectionalRangeFromPoint that adapts a TiledImage range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it (in a read-only manner) |
CTiledImageBidirectionalRangeFromPoint | Aim: model of CBidirectionalRangeFromPoint that adapts a TiledImage range of elements bounded by two iterators [itb, ite) and provides services to (circularly)iterate over it |
CToDGtalCategory | Aim: Provides the DGtal category matching C {ForwardCategory,BidirectionalCategory,RandomAccessCategory} |
CToDGtalCategory< boost::bidirectional_traversal_tag > | |
CToDGtalCategory< boost::forward_traversal_tag > | |
CToDGtalCategory< boost::iterators::detail::iterator_category_with_traversal< std::input_iterator_tag, boost::bidirectional_traversal_tag > > | |
CToDGtalCategory< boost::iterators::detail::iterator_category_with_traversal< std::input_iterator_tag, boost::forward_traversal_tag > > | |
CToDGtalCategory< boost::iterators::detail::iterator_category_with_traversal< std::input_iterator_tag, boost::random_access_traversal_tag > > | |
CToDGtalCategory< boost::random_access_traversal_tag > | |
CToDGtalCategory< std::bidirectional_iterator_tag > | |
CToDGtalCategory< std::forward_iterator_tag > | |
CToDGtalCategory< std::random_access_iterator_tag > | |
CTrace | Implementation of basic methods to trace out messages with indentation levels |
CTraceWriter | Virtual Class to implement trace writers |
CTraceWriterFile | |
CTraceWriterTerm | Implements trace prefix for color terminals |
CTransformedPrism | Class to modify the position and scale to construct better illustration mode |
CTranslate2DDomain | Class to modify the data of an given image and also the possibility to translate it (optional) |
CTrueDigitalSurfaceLocalEstimator | Aim: An estimator on digital surfaces that returns the reference local geometric quantity. This is used for comparing estimators |
CTrueGlobalEstimatorOnPoints | Aim: Computes the true quantity to each element of a range associated to a parametric shape |
CTrueLocalEstimatorOnPoints | Aim: Computes the true quantity to each element of a range associated to a parametric shape |
CTwoStepLocalLengthEstimator | Aim: a simple model of CGlobalCurveEstimator that compute the length of a curve using the l_1 metric (just add 1/h for every step) |
►CUmbrellaComputer | Aim: Useful for computing umbrellas on 'DigitalSurface's, ie set of n-1 cells around a n-3 cell |
CState | |
CUniqueAssociativeCategory | |
CUnorderedAssociativeCategory | |
CUnorderedMapAssociativeCategory | |
CUnorderedMultimapAssociativeCategory | |
CUnorderedMultisetAssociativeCategory | |
CUnorderedSetAssociativeCategory | |
CUpdate2DDomainPosition | Class to modify the position and orientation of an 2D domain |
CUpdateImage3DEmbedding | Class to modify the 3d embedding of the image (useful to display not only 2D slice images). The embdding can be explicitly given from the 3D position of the four bounding points |
CUpdateImageData | Class to modify the data of an given image and also the possibility to translate it (optional) |
CUpdateImagePosition | Class to modify the position and orientation of an textured 2D image |
CUpdateLastImagePosition | Class to modify the position and orientation of an textured 2D image |
CVCMDigitalSurfaceLocalEstimator | Aim: This class adapts a VoronoiCovarianceMeasureOnDigitalSurface to be a model of CDigitalSurfaceLocalEstimator. It uses the Voronoi Covariance Measure to estimate geometric quantities. The type TVCMGeometricFunctor specifies which is the estimated quantity. For instance, VCMGeometricFunctors::VCMNormalVectorFunctor returns the estimated VCM surface outward normal for given surfels |
CVectorField | Aim: VectorField represents a discrete vector field in the dec package. Vector field values are attached to 0-cells with the same duality as the vector field |
►CViewer3D | |
CCompFarthestPolygonFromCamera | |
CCompFarthestSurfelFromCamera | |
CCompFarthestTriangleFromCamera | |
CCompFarthestVoxelFromCamera | |
CExtension | |
CGLTextureImage | |
CImage2DDomainD3D | |
CTextureImage | |
CViewer3DFactory | Factory for GPL Viewer3D: |
►CVolReader | Aim: implements methods to read a "Vol" file format |
CHeaderField | |
CVolWriter | Aim: Export a 3D Image using the Vol formats |
►CVoronoiCovarianceMeasure | Aim: This class precomputes the Voronoi Covariance Measure of a set of points. It can compute the covariance measure of an arbitrary function with given support |
CCharacteristicSetPredicate | |
►CVoronoiCovarianceMeasureOnDigitalSurface | Aim: This class specializes the Voronoi covariance measure for digital surfaces. It adds notably the embedding of surface elements, the diagonalisation of the VCM, and the orientation of the first VCM eigenvector toward the interior of the surface |
CEigenStructure | Structure to hold a diagonalized matrix |
CNormals | Structure to hold the normals for each surfel (the VCM one and the trivial one) |
CVoronoiMap | Aim: Implementation of the linear in time Voronoi map construction |
CWarning_promote_trait_not_specialized_for_this_case | |
CXe_kComputer | |
CXe_kComputer< 0, Ring, Alloc > | |
►NLibBoard | |
CArc | An arc |
CArrow | A line between two points with an arrow at one extremity |
►CBoard | Class for EPS, FIG or SVG drawings |
CState | |
CCircle | A circle |
CDot | A line between two points |
CEllipse | An ellipse |
CGouraudTriangle | A triangle with shaded filling according to colors given for each vertex |
CGroup | A group of shapes. A group is basically a ShapeList except that when rendered in either an SVG of a FIG file, it is a true compound element |
CImage | Used to draw image in figure |
CLine | A line between two points |
CMessageStream | |
CPath | A path, according to Postscript and SVG definition |
CPoint | Struct representing a 2D point |
CPolyline | A polygonal line described by a series of 2D points |
CQuadraticBezierCurve | A quadratic Bezier curve having 3 control points. NB. It is also a parabola arc |
CRect | Struct representing a rectangle on the plane |
CRectangle | A rectangle |
CShape | Abstract structure for a 2D shape |
CShapeList | A group of shapes |
CText | A piece of text |
CTransform | Base class for transforms |
CTransformCairo | Structure representing a scaling and translation suitable for an Cairo output |
CTransformEPS | Structure representing a scaling and translation suitable for an EPS output |
CTransformFIG | Structure representing a scaling and translation suitable for an XFig output |
CTransformSVG | Structure representing a scaling and translation suitable for an SVG output |
CTransformTikZ | Structure representing a scaling and translation suitable for an TikZ output |
CTriangle | A triangle. Basically a Polyline with a convenient constructor |
►Nstd | STL namespace |
Chash< DGtal::BigInteger > | |
Chash< DGtal::KhalimskyCell< dim, TInteger > > | |
Chash< DGtal::PointVector< dim, EuclideanRing, Container > > | |
Chash< DGtal::SignedKhalimskyCell< dim, TInteger > > | |
CDerivativeTester | |
CDerivativeTester< Calculus,-1 > | |
CHodgeTester | |
CHodgeTester< Calculus,-1 > | |
Cmyreverse_iterator | |