| converters | |
| estimators | |
| Generators | |
| Image processing | |
| Image restoration and inpainting with Ambrosio-Tortorelli functional | |
| visualization | |
| volumetric | |
| convertVol | Converts volumetric file into volumetric file from different formats (pgm3d, vol, longvol). This tool can also be used to upgrade a Version-2 Vol or Longvol file to the new (compressed) Version-3 |
| dicom2vol | Converts dicom file into a volumetric file (.vol, .longvol .pgm3d) |
| freeman2img | Transforms one or several freeman chains into a pgm file by filling their interior areas |
| freeman2sdp | Transform freeman chain into a Sequence of Discrete Points. Result is given to std output |
| HDF52vol | Converts a 3D 8-bit HDF5 file to vol |
| heightfield2shading | Renders a 2D heightfield image into a shading image |
| heightfield2vol | Converts a 2D heightfield image into a volumetric file |
| img2freeman | Extracts Freeman chains from thresholded image |
| imgAddNoise | Adds noise (Kanungo's) to a binary 2D object |
| itk2vol | Converts itk file into a volumetric file (.vol, .pgm3d) |
| longvol2vol | Converts a longvol (long int) to a vol file (unsigned char) |
| mesh2heightfield | Converts a mesh file into a projected 2D image given from a normal direction N and from a starting point P |
| mesh2vol | Convert a mesh file into a 26-separated or 6-separated voxelization in a given resolution grid |
| ofs2off | Convert OFS file into OFF mesh format |
| raw2HDF5 | Converts a 3D 8-bit raw file to HDF5 |
| raw2vol | Converts a 8-bit raw file to vol |
| sdp2vol | Converts digital set of points into a volumic file |
| slice2vol | Converts set of 2D images into volumetric file (pgm3d, vol, longvol) |
| vol2heightfield | Converts volumetric file into a projected 2D image given from a normal direction N and from a starting point P |
| vol2obj | Converts any volumetric file to an OBJ one. Each grid point with value between [thresholdMin,thresholdMax] is exported as a unit cube |
| vol2raw | Converts a vol to a 8-bit raw file |
| vol2sdp | Extracts digital points from 3d vol files |
| vol2slice | Convert a volumetric file (.vol, .longvol, .pgm3d) into a set of 2D slice images |
| vol2vox | Converts a vol file to a MagicaVoxel VOX file (https://ephtracy.github.io) |
| volBoundary2obj | Extracts digital points from 3d vol files |
| vox2vol | Converts a MagicaVoxel VOX file (https://ephtracy.github.io) to a vol file |
| 2dCompImage | Compare images and displays differences (squared and absolute differences) |
| 3DCompSurfelData | Computes generic scalar surfel data comparisons (squared error) (given from an input data file and from a reference one) |
| 3DCurvatureViewer | Computes and visualizes mean or gaussian curvature of binary shapes |
| 3DCurvatureViewerNoise | Same as 3DCurvatureViewer, but allows to add some noise to objects |
| 3dCurveViewer | Displays a 3D curve given as the input filename (with possibly projections and/or tangent information) by using QGLviewer |
| 3dDisplaySurfelData | Displays surfel data from SDP file with color attributes given as scalar interpreted as color |
| 3dHeightMapViewer | Displays 2D image as heightmap by using QGLviewer |
| 3dImageViewer | Displays volume file as a voxel set by using QGLviewer |
| 3dImplicitSurfaceExtractorBy4DExtension | Computes the zero level set of the given polynomial |
| 3dImplicitSurfaceExtractorByThickening | Computes the zero level set of the given polynomial |
| 3DSDPViewer | Displays a sequence of 3d discrete points by using QGLviewer |
| 3dVolBoundaryViewer | Display the boundary of a volume file by using QGLviewer |
| 3dVolViewer | Displays volume file as a voxel set by using QGLviewer |
| displayContours | Displays discrete contours |
| meshViewer | Displays OFF mesh file by using QGLviewer |
| patternTriangulation | Draws the Delaunay triangulation of a pattern using DGtal library |
| sliceViewer | Displays volume file with slice image by using QT and QGLviewer |
| 2dLocalEstimators | Compares local estimators on implicit shapes using DGtal library |
| 3dCurveTangentEstimator | This program estimates the tangent vector to a set of 3D integer points, which are supposed to approximate a 3D curve |
| curvatureBC | Estimatates curvature using a binomial convolver |
| curvatureMCMS | Estimates curvature using length of most centered segment computers |
| curvatureScaleSpaceBCC | Generate the Curvature Scale Space image using a binomial convolver based estimator |
| eulerCharacteristic | Computes the Euleur Characteristic of a vol to a 8-bit raw file |
| generic3dNormalEstimators | Computes a normal vector field over a digitized 3D implicit surface for several estimators |
| lengthEstimators | Generates multigrid length estimations of paramteric shapes using DGtal library |
| statisticsEstimators | Computes satistics (L1, L2, Loo) from results of two estimators |
| tangentBC | Estimates tangent using a binomial convolver |
| vol2normalField | Generates normal vector field from a vol file using DGtal library |
| volSurfaceRegularization | Regularize a cubical complex into a smooth quadrangulated complex |
| contourGenerator | Generates multigrid contours of 2d digital shapes using DGtal library |
| shapeGenerator | Generates shapes using DGtal library |
| 3dVolMarchingCubes | Outputs the isosurface of the input volume as an OFF file |
| criticalKernelsThinning3D | Applies an criticalKernels thinning algorithm of a 3d image file (vol,longvol,pgm3d...) with 3D viewer |
| homotopicThinning3D | Applies an homotopic thinning of a 3d image file (vol,longvol,pgm3d...) with 3D viewer |
| volAddBorder | Adds a border of one voxel with value 0 around a vol file |
| volAddNoise | Adds Kanungo noise to a binary object with 0 values as background points and values >0 for the foreground ones |
| volCComponentCounter | Counts the number of connected component (same values) in a volume (Vol) file image |
| volCrop | Crops a 3D vol image from domain coordinates |
| volFlip | Flips 2D slice image of an 3D vol image (mirror transformation) |
| volImageMetrics | Applies basic image measures (RMSE, PSNR) between two volumetric images A and B |
| volIntensityScale | Applies a linear rescaling of the image intensity from an input intensity interval [InMin, InMax] into an output interval [OutMin, OutMax] |
| volReSample | Re samples a 3D volumetric image (.vol, .longvol, .pgm3d) with a given grid size |
| volSegment | Segments volumetric file from a simple threshold which can be set automatically from the otsu estimation |
| volShapeMetrics | Applies shape measures for comparing two volumetric images A and B (shape defined from thresholds) |
| volSubSample | Brutally sub samples a vol file (division by 2 in each direction) |
| volTrValues | Applies basic vol image transform from the input values to output values |
| imageProcessing/at-u0-v1 | Computes a piecewise smooth approximation of a grey-level or color image, by optimizing the Ambrosio-Tortorelli functional (with u a 0-form and v a 1-form) |
| imageProcessing/at-u2-v0 | Computes a piecewise smooth approximation of a grey-level or color image, by optimizing the Ambrosio-Tortorelli functional (with u a 2-form and v a 0-form) |
1.8.10
